This Middleburn RS2 s/s set up has hardly been used. It came off a tandem but I used it briefly for single speed until my knee complained big time. NB because it is a tandem crank set the pedal threads are the wrong way round. I used Loctite bearing fit to fix the pedals and they stayed tight for the couple of hundred miles I rode. I used gentle heat to remove the pedals. The threads are in perfect condition.
Everything in the photo is included, but you have to choose the BB, either 127mm UN72 or 113mm UN51.
The chain rings are s/s and 34t, the crank arms are 175mm, there is a set of spare spider bolts, and the extractor bolts work fine. Single speed tensioner included for non s/s frames.
£125 all in, parcel weight packed up is 1500g: your choice of postal service at cost.
Everything in the photo is included, but you have to choose the BB, either 127mm UN72 or 113mm UN51.
The chain rings are s/s and 34t, the crank arms are 175mm, there is a set of spare spider bolts, and the extractor bolts work fine. Single speed tensioner included for non s/s frames.
£125 all in, parcel weight packed up is 1500g: your choice of postal service at cost.
