Retrobike Forum Index

It is currently Mon Aug 03, 2020 10:10 pm

* Login   * Register * Search  * FAQ



Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Fri Jul 31, 2020 5:21 pm 
Newbie

Joined: Tue Jul 14, 2020 6:44 am
Posts: 7
So having mostly ridden a modern Trek recently, I want to get back to Steel. I'm looking to get a steel frame (ideally lugged rather than fillet brazed) and ideally be able to take as much of the 10spd 105 group set as I can from the Trek and put it onto that.

I'm looking for something that can do fast Light Touring/ Audax, Gravel and Rough Stuff. So cantilever brakes, rear rack mounts and front and back mudguard mounts and spacing for some decent width tires.

I spent last week riding my brothers 853 Dawes, before coming back to the Trek and although the Trek handles well with light rough stuff, it just doesn't feel as good.

I'm guessing that at a minimum I'll need 130mm spaced rear dropouts, will have to get a new external bottom bracket- what else should I look out for? Want to make sure when I put up a post in the wanted forum I'm clear about what I need.


Top
 Profile  
 
PostPosted: Fri Jul 31, 2020 10:28 pm 
Retro Guru
User avatar

Joined: Mon Mar 02, 2009 4:22 pm
Posts: 1772
Any 90s frame should be a pretty much bolt-on affair. If it’s not already 130mm spaced (pretty much anything mid 90s onward) then a 126mm frame will take a 130mm wheel with no issues. Get some cable stops for the downtube shifter bosses so you can use your 105 brifters. 80s frames will probably all be 126mm spaced and have all the frame fittings you need. 70s will mostly be 126mm spaced but there was a trend in the early 70s to have no brazed on fittings, so they often don’t have shifter bosses on the downtube or bottom bracket cable guides. You’ll need to get a downtube shifter band for your cable stops and maybe a cable guide for under the bottom bracket. 60s frames are stepping into 120mm spacing and you’ll have trouble pulling them open to 130mm. They also don’t generally have derailleur hangers on the rear dropout.

It might actually be the canti bosses that hold you up - but only because so few bikes were fitted with them compared to caliper brakes. They are out there though, plus plenty of cx bikes.


Top
 Profile  
 
PostPosted: Fri Jul 31, 2020 11:18 pm 
Newbie

Joined: Tue Jul 14, 2020 6:44 am
Posts: 7
I wish there was a like button on here because that's a really useful reply.

When I was a teenager I had a Simoncini Special which was basically a cross frame with mudguard and rack mounts. Unfortunately at the time I didn't appreciate how good it was, I wanted something with caliper brakes. It was also a proper ASP special, with parts my Dad had lying around. It was then passed to my brother who later added a modern groupset (which then ended up on the Dawes). Now my Missus has it. Unfortunately its a 19 anyways and I need a 20.5- 21.

When I put the wanted ad up I'll try include some of what you've mentioned to make it clear what I'm after.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: heymarge, macmac, nonowt and 67 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

About Us

Follow Retrobike

Other cool stuff

All content © 2005-2015 Retrobike unless otherwise stated.
Cookies Policy.
bikedeals - the best bike deals in one place
FatCOGS - Fat Chance Owner's Group

Powered by phpBB® Forum Software © phpBB Group