Just a quick one for any of you using a RC200 with track ends (or any other bike with trackends for that matter). I got some DMR chain tugs (they were very cheap) but they are too big to fit on the RC200 frame. The catch on the frame itself so dont fit flush with the dropouts. Does any one else use chain tugs on this frame or any other frame that has a similar problem? What do you use?
Chain tugs on a pace Rc200
- Thread starter s_zigmond
- Start date
http://cgi.ebay.co.uk/old-school-bmx-ch ... 240%3A1318
those will do but will only pull the quick release . but are nothing more than a bolt with a washer welded on the head end and a nut with a large penny washer to adjust
you could file the dmr one down so the loop is flush with the quick release as its only the inner tab that pulls the axle
those will do but will only pull the quick release . but are nothing more than a bolt with a washer welded on the head end and a nut with a large penny washer to adjust
you could file the dmr one down so the loop is flush with the quick release as its only the inner tab that pulls the axle
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
