Cinelli ti inch or 1&1/8 quill stem

[bikeworkshop]

Cinelli Grammo ATB or TRIA titanium stem road race bike | eBay

No long bolt or wedge and missing rubber cover. 120 MM long and 90 degree "drop". All parts are in good working order unless indicated.

www.ebay.co.uk

 

[retrobate]

Not sure if it is 1 & 1/8". Description is ATB 1 1/8" or Tria 1".
Seems expensive for an incomplete component.

 

[bikeworkshop]

Specs are on the box - shows od of quill at 25.4mm, which is the internal diameter of a 1&1/8 steerer.

True its not cheap though, as hunting up the bolt and wedge could easily cost you a scruffy £40 stem, and the little plastic topcapis proper unobtainable.

But I've never seen an atb quill grammo - and cinelli is extremely collectable.

 

[retrobate]

Specs are on the box - shows od of quill at 25.4mm, which is the internal diameter of a 1&1/8 steerer.

Top right corner or somewhere else?
ATB top right of box front = 25.4mm
Tria bottom left of box front = 22.2mm

 

[bikeworkshop]

I was assuming that with that upward angle, no self respecting Italian would consider it could possibly be for road...
but then as 99.99% of Italian headsets are "inch"...

Measuring the photo with verniers implies 22.2, assuming the bar clamp is 26