Search results

***NOW SOLD *** Pace RC200 F5 Mountain bike, 18" with rare Pace front heel and carbon hub. In lovely condition, just not seeing enough use. There are no cracks in the frame. It has the following spec - Rare Pace RC50 carbon hub and Mavic X517 ceramic rim Mavic X618 rear wheel King headset...

Hi all, I've just converted one MTB to tubeless using brand new Conti tubeless ready tyres, and a Stan's conversion kit, on DT Swiss rims. All looked good, until I noticed that the tyres were dropping to 10-20psi after each ride. A soapy water test revealed about 10 tiny holes on the tread...

So with a little play developing in my BB, I have decided to replace the BB on my RC200 F5. I have got the old one out, and it is a Shimano BB UN72. I thought i might be able to replace it with a new one, but of course being an old bike, they are no longer available it seems! :facepalm...

I've just fitted a new chain to my Pacey RC200 after the old one finally gave out, it was the original one I think! 17 years service! :D Everything works fine, except for the 12 cog on the rear cassette, when the power is down the chain keeps skipping. most other cogs are fine, so it is...

I'm looking for a 1" Chris King headset for my Pace, does anyone have one knocking around they don't need anymore?

I've got a set of MXCD forks and have replaced the elastomers with the ones from Pace, which are medium, these are the only ones they stock. The ride is a little hard for me, so I am looking to vary the stack with some soft for a bit more damping as mentioned in the fork manual, does anyone...

So here is my 1992 Kona Lava Dome, which I have owned since new. This is the only bike I have ever owned. Stick with me, I shall explain… Back in the old school days, (when I was actually at school, a long time ago) Mint Sauce was the icon, and a Pace the bike I wanted to have. But of course...

I have an RC45 stem (120mm o deg rise) which I am finding a little long, just wondering if someone is suffering the opposite and would like to swap? Otherwise I'm looking for a Pace or Ringle stem around 100mm long or less

I've put these bits on ebay which are surplus to build requirements as I am no longer working on an F2 frame. Suitable for Pace fans, in particular an F2 build! XT braze on front mech http://www.ebay.co.uk/itm/121192959328? ... 1555.l2649 Sachs braze on front mech...

I'm trying to fit V's to the rear bosses on my F5, and have spent ages trying to fathom how the right side parallel push pivots are out of line and the pad is dropping off the rim. With further investigation it seems that the pin hole on the brake boss is out of line (see photo) , and I have...

I'm looking for a black 29.4 seatpost, inline, if anyone has one knocking around. Otherwise I might have to try the BBB ones, cheap I know but are they any good?

So I've just picked up a lovely RC200 to restore which turned out to be an F5 not an F3 :D , and got home to find the seatpost is seized. :( I know this is a well covered subject, so apologies, however I've not seen much out there about Alu posts in Alu frames. knowing the fragility of Paces...

I'm looking to build a bike for the wife, I have most bits knocking around spare, apart from a decent frame. Does anyone have one or suggestions where I can find one? It doesnt have to be too retro, but needs to be able to take V brakes.

Now my build project has changed from an F2 to an F3, I no longer need the braze on front mech I just bought, nor the 27.0mm Syncros seatpost, neither will fit! Mentioning them here first as they are pretty unique parts, in fantastic condition, so would suit an F2 owner. (I am looking for a...

Ok, so my Pace build is on hold, as the frame I bought on ebay last week has a cracked head tube :( Gutted. Problem is over the last few weeks I have acquired all the other unusual sized bits needed for the build, and now no frame. Being short, only the smallest pace frame will do. I'm really...

I'm having to fit a 1" steerer to my RC35 MXCD forks to fit my RC200, so the lovely Pace stem I have won't fit. :( I can't find many 1" stems around; does this mean that older paces had threaded headsets? Should I therefore be looking for a threaded steerer instead? Does anyone know what would...

Ive just bought an F2 frame off ebay, not listed with any issues. I opened it in excitement, only to spot a 1 inch crack at the bottom of the head tube, which has obviously been there for a while. (see photo) Gutted. Can anyone tell me if this is repairable? Or is it a problem at all?

I'm looking for a front mech for my F2 build if anyone knows where I can find one. I've tried looking at Mavics/suntours, but not sure what I need for three speed. Will any one do? Cheers

I've just replaced the elastomer stack on my old MXCD's with elastomers from Pace- looking at the old RC35 manual there should be 8 in the stack, however Pace sent me a bag of 18 (9 each side), and having fitted the 8, there is space on the stack, and as a result there is about 1/2 inch play in...

Hi, Does anyone out there have either a 16.5" or 18" RC200, who would be able to tell me the standover height for either frame? Either or would do, as I should be able to work out the difference. I need to make sure I'm not going to catch my plums on the top tube...