Wanted 24mm spacer for Shimano HT II chainset spindle?

[Fatal Swan]

I'm setting up a Shimano Hollowtech II chainset on a pressfit BB using a Wheels Manufacturing Shimano adapter. However I set up the front mech limits it won't quite drop onto the little chainring. I can't use the regular BB spacers since I'm not using a Shimano BB, so the only thing I can think of is a spacer (24mm inside diameter) between the drive side crank and the BB adapter to move the chainrings out a little. I don't know if these exist though... anyone??

 

[clubby]

Race Face use a system of washers to preload their Affects cranks. Would think they’d work for what you need. Info here.

https://www.google.co.uk/search?q=race+face+aeffect+spacer&ie=UTF-8&oe=UTF-8&hl=en-gb&client=safari

That said, any thin spacer of the correct diameter would probably also work. Cheap washers of all diameters available cheap on eBay. Buy 10 thin ones and add one at a time until it works.

 

[Fatal Swan]

Ah, thanks! I did have a quick look for generic 24mm spacers on ebay but didn't turn up anything that looked suitable. Those Race face ones look like they'd do.

Having a further search I've just found these Wheels Manufacturing ones: https://www.jejamescycles.com/produ...MIg420mf_J8AIVzdvVCh0N9wjNEAYYBSABEgJnjfD_BwE which I guess must be specifically designed to work with those adapaters for pressfit BBs, so I might just try a couple of those!