Search results

Hi, looking for a good Hope XC4 caliper or complete brake. One of mine has suffered corrosion on the pistons and now leaks. Thanks Adrian

For Sale is my 17.5" Cove Handjob Frame Its a fairly early example I believe from 1996, in good condition. As you can see it has V brake bosses and the disc brake mount. Tubing is columbus Nemo. There are no dents and very few chips to the tough satin paint work. The chainstay area is in...

Wanted Flite titanium saddle in good condition, don't mind a few scuffs but no rips. Ideally the older style saddle without the stitched branding or button style badge on the back. Cheers Adrian Now sorted, thanks

For Sale Race Face AirAlloy low Riser Bars. Decent condition alloy bars. Some marks as per photos, no deep scratches and no dents £12 posted SOLD RaceFace Evolve XC stem1 1/8 ahead, 70mm length, 25.4mm clamp. Very good condition £12 posted RaceFace Seatpost 27.2mm diameter, 350mm...

Hi, the following forsale: - SOLD Kona Frame, 19", stripped to bare metal. Straight other than a couple of small dings, one on the top tube (invisible once filled with a tiny amount of car body filler) the other on the drive side chainstay. See photos. includes cable guides. has had crud...

The following For Sale, prices include UK mainland postage. XT RD M760 (9 Speed) Rapidrise. Excellent, close to mint, condition. This is a rapidrise unit so is reverse sprung. £20 XT RD M739 (8 Speed) - Good overall condition, tight spring, new sealed bearing jockey wheels. £18 XT FD...

Hi, Stuff forsale, prices include UK mainland postage... 1" Tioga T Bone Stem 130mm c to c. close to mint, boxed. £15 SOLD 1" Nitto Quill stem. 120mm c to c. close to mint, boxed £15 SOLD 1 1/8" Quill stem. 105mm centre to centre, 110mm down the shaft. Some marks but generally...

Hi looking for a 1" Ahead steerer tube to fit my '94 RC35s. Length not too much of a problem as head tube is short. Also require the shim that seats the lower headset race on to the forks (which I think normally comes with the steerer tube?) and a spacer to fit the 1" steerer tube into the...

Hi there, Looking for the above. Mech - Any condition mech considered as long as its in working order and not bent. Chainring - Alloy 38T standard 5 bolt 110BCD chainring required in standard silver finish. Stem - Any condition considered, 100-110mm shallow rise ideally black with...

Hi there, The clearout continues, prices include UK mainland postage... 1" Tioga T Bone Stem 130mm c to c. Nos and boxed. £15 (photo to follow) 1" Odyssey Quill stem. 135mm c to c. Well used but a good steel stem. Has an interesting cable pulley arrangement. £7 SOLD 1 1/8" Quill stem...

Hi, Having a bit of a clear out. All prices include UK mainland postage: - Manitou SX Forks 1 1/8" 195mm ahead steerer, Not bad overall condition some paint chips and transfers slightly creased. Were working very well when removed from bike sometime ago, movement is good, may need an oil top...

Hi, looking for a 1" Quill stem, zero or low rise, 100 to 120mm length. Any condition considered. Thanks Adrian

As described above, off a 2001/2 Sunn Bike From GB Cycles. Black Aluminium, Almost unmarked, just a couple of minor nicks here and there. £15 posted

Hi, I'm after a Hope Disc Brake lever top cap/adjuster like the one pictured - I've got xc brakes but the levers are the same as the C2s. willing to buy knacked lever/brake if top cap is good cheers, Adrian

Hi, 38 & 48T chain rings required to fit standard 5 bolt shimano set up, 110bcd Cheers

The above forsale, used but not abused condition, however the clamp requires replacing (11 quid for a single bolt version from chainreactioncycles) due to a hairline crack in the central section. Some light marking on the post towards the bottom 10-15cm but would polish up, some small sections...

Hi, As above, M952-5 36 tooth chain ring, not used and still in packaging £25 posted.

Hi, can anyone help out here. Looking for a Cattleprod stem for a 1" quill set up, length 110-120, zero rise, black if possible. cheers Adrian

Hi there, Anyone got a set of kona project 2s with a 1" steerer, threaded if possible? Steerer length not a problem as my frame's head tube is quite short, so could be trimmed down. Any condition considered cheers Adrian