AMP parts and service tools
- Thread starter devil77
- Start date
Re:
I modified a G-clamp to remove some of the pins but a vice works for the shorter one. See here;
viewtopic.php?f=1&t=315777
I modified a G-clamp to remove some of the pins but a vice works for the shorter one. See here;
viewtopic.php?f=1&t=315777
Re:
You can reduce the .8mm to .7mm thickness using carborundum grinding paper of around 600 grit size, takes a handful of seconds and causes no problem for the clips except gor corrosion proof loss if they have them. I use srainless ones when replacing them.
You can reduce the .8mm to .7mm thickness using carborundum grinding paper of around 600 grit size, takes a handful of seconds and causes no problem for the clips except gor corrosion proof loss if they have them. I use srainless ones when replacing them.
Try Inch circlips:
https://www.bearingstation.co.uk/produc ... D1400-5-16
Model D1400-5-16: 0.3125" / 7.9mm Internal, 0.025"/6.3mm thick
All the best,
https://www.bearingstation.co.uk/produc ... D1400-5-16
Model D1400-5-16: 0.3125" / 7.9mm Internal, 0.025"/6.3mm thick
All the best,
Attachments
Just an example for the specification dimensions, it's a fair enough price to cover picking just one from stock.
Plenty of better prices in bulk around...Here you go...£4.17 for 100
https://shop4fasteners.co.uk/catalog/pr ... gory/4028/
All the best,
Plenty of better prices in bulk around...Here you go...£4.17 for 100
https://shop4fasteners.co.uk/catalog/pr ... gory/4028/
All the best,
Similar threads
