K Kevinski66 Dirt Disciple Jun 19, 2017 #1 Is it possible to swap the steerer tube on these old forks?
Smithjss70 BoTM Winner Feedback View Jun 19, 2017 #2 Re: They should be able to be pressed out by a professional.
R retrobate Overbury's Fan Feedback View Jun 19, 2017 #3 Re: If you are talking about the original RS1 the steer tube is a bolt in bolt out item. Undo the 4 crown bolts, support the crown and tap the steer tube out (from the top down) with a soft faced hammer.
Re: If you are talking about the original RS1 the steer tube is a bolt in bolt out item. Undo the 4 crown bolts, support the crown and tap the steer tube out (from the top down) with a soft faced hammer.
Smithjss70 BoTM Winner Feedback View Jun 20, 2017 #4 Re: Like so... Replacement steerer may need pressing in though.