Race Face Taperlock Titanium Square Taper Bottom Bracket NOS

Re: Race Face Taperlock Titanium Square Taper Bottom Bracket

Hi!

I'm interested in one 68x107mm.
I intend to mount on an old Middleburn duo crankset. I have them mounted on one 68x113 but the chainline is too much. The problem I can be facing is duo to the inner part of the crank (not the chainrings) hitting the bottom bracket shell. Do this bb cups tend be flush with the frame?
 
Re: Race Face Taperlock Titanium Square Taper Bottom Bracket

No the beauty of race face BB's are they have no flanges. Which means you can dial in the chain line absolutely perfect, you can have the cup inserted into the bb shell on one side and protruding on the other. If a 107mm axle works for your cranks, the race face BB's are the best way to dial a perfect chain line.

It should work perfectly on a Middleburn duo set up
 
Re: Race Face Taperlock Titanium Square Taper Bottom Bracket

It is a perfect match then! :)

PM on the way!
 
Re: Race Face Taperlock Titanium Square Taper Bottom Bracket

Sorted. Will post it today.

I now have 2 left :D
 
Re: Race Face Taperlock Titanium Square Taper Bottom Bracket

Hey, any possibility that you have any of these bottom brackets left? I am building up a bike with a set Race Face Turbine LP cranks and this bottom bracket would perfectly. I have one just like it but is pretty worn out.

Regards,
Chip
 
Re: Race Face Taperlock Titanium Square Taper Bottom Bracket

I do yes, PM me and I will send you my PP details
 

Latest posts

Back
Top