36 hole Mavic hubs 126mm on the rear (sorted)

over15degrees

Dirt Disciple
Hello, looking for a set of Mavic hubs or just the front. Both with 36 hole, looking for 126mm spacing.

Cheers.

(just to be clear, hubs for road, not MTB. Thanks)
 
Re:

Hi
I've a mavic front hub (not sure of model , maybe 531) it's on a mavic open sup rim
Looking for £50 for the wheel, it has the mavic skewer
 
Re:

I have a set of 36 hole Mavic 501s with 126mm rear . . . . . .




And I'm looking for some rims to go with them :roll:

Always the way isn't it !

mike
 
Re: Re:

Mike Muz 67":20hr3ao5 said:
I have a set of 36 hole Mavic 501s with 126mm rear . . . . . .




And I'm looking for some rims to go with them :roll:

Always the way isn't it !

mike

I know right?!

there are quite a few NOS mavic rims on ebay, on the other hand the hubs are gold dust, apparently...
 
Re: 36 hole Mavic hubs 126mm on the rear

501 hubs have a black ring around the NDS bearing and the rearhub is 126 or 130mm OLD with a spacer , model 500 and 550 were bare and 100mm front /126mm rear only
 

Attachments

  • 501 hubs.JPG
    501 hubs.JPG
    123 KB · Views: 942
  • mavic 500.jpg
    mavic 500.jpg
    32.6 KB · Views: 942
Re: 36 hole Mavic hubs 126mm on the rear

531 hubs were for MTB (135 OLD rear) Immish Ed and have a green ring around the outside of the bearing for reference
 

Attachments

  • $T2eC16F,!w0FI,RTnf0nBSTiJS0wyw~~60_57.JPG
    $T2eC16F,!w0FI,RTnf0nBSTiJS0wyw~~60_57.JPG
    152.2 KB · Views: 941
Re: 36 hole Mavic hubs 126mm on the rear

just informing sorry , If you get a choice of 7 speed rear hubs the 550s are stronger than the 500s IMO due the the DS bearing placement. the 550 design concept was then used for every screw on rear hub Mavic made (where the DS bearing is at the extreme outside of the shell)
 

Attachments

  • cutaway 501 - Copy.JPG
    cutaway 501 - Copy.JPG
    89.5 KB · Views: 932

Latest posts

Back
Top