Signed for postage to normal rate UK areas included, sales over £50 will be insured, postage reduced for multiple buys.
Paypal gift or cover the charges please.
dibs posts on the thread first followed by PM.
Offers welcome via PM, I won't be offended, I'm not desperate for the cash so save yourself the time and don't offer me 50% of the asking price
.
If you think my prices are mad keep it to yourself thankyou, if it doesn't sell then it's overpriced, if you think it's overpriced and want it make an offer via PM.
Titec stem 120mm rise as per picture, 1 1/8" steerer, 25.4mm bars, 5cm stack height. £15
GT Top medium, one size too small for me :cry: what I paid for it SOLD £20
Hope Stem Goldy / Bronze 1 1/8", 110mm, 0 rise, for normal (old school) 25.4 bars, Marine grade A4-80 stainless bolts, one tiny mark on the top cap. £30
Anodised Purple seat binder bolt, a couple of small marks butt with some careful placement won't be seen £5
I'm keen to dismantle either or both wheels to keep the pairs of D521's or XTR hubs together.
XTR hubs with XT skewers - £90
XTR hubs with XT skewers + rear built on D521 + loose D521 - £120
XTR hubs with XT skewers + pair of 217's (not built) £120
I can get wheels built for £45/ea with DT double butted spokes.
Pair D521's £50 - £20/£30 new brake surfaces
XTR M910 hub set 32h for 8sp cassette (will only split hubs once buyer for each has paid).
Front hub NOS & never built but a few marks from storage.
Rear hub, 135mm (with orignal spacers each side so could be shortened to 130mm if required) shows evidence of second build in it's life, currently built into mavic D521 with plain gauge DT spokes, bearings perfectly smooth, I've ridden on this wheel for a bit, freewheel fine.
Propose to sell with the XT skewers which are quite a good match, M910 skewers are rarer than these hubs!!!
Pair of 32h Mavic 217 rims - enough life to be worth building again - £35
Proflex rear stays from 957, take the conical ended rear shock - £10
Onza Hox spd pedals, expensive when new, obviously used but boxed with manual, everything present, cleats - not worn out, bearings fine & serviceable when required, possibly shimano cleat compatible I can check this if it's important to you - sold £15
one of the frames has one of the corners cracked off, can't remember how.
Any questions just ask.
Alex
Paypal gift or cover the charges please.
dibs posts on the thread first followed by PM.
Offers welcome via PM, I won't be offended, I'm not desperate for the cash so save yourself the time and don't offer me 50% of the asking price
.If you think my prices are mad keep it to yourself thankyou, if it doesn't sell then it's overpriced, if you think it's overpriced and want it make an offer via PM.
Titec stem 120mm rise as per picture, 1 1/8" steerer, 25.4mm bars, 5cm stack height. £15
GT Top medium, one size too small for me :cry: what I paid for it SOLD £20
Hope Stem Goldy / Bronze 1 1/8", 110mm, 0 rise, for normal (old school) 25.4 bars, Marine grade A4-80 stainless bolts, one tiny mark on the top cap. £30
Anodised Purple seat binder bolt, a couple of small marks butt with some careful placement won't be seen £5
I'm keen to dismantle either or both wheels to keep the pairs of D521's or XTR hubs together.
XTR hubs with XT skewers - £90
XTR hubs with XT skewers + rear built on D521 + loose D521 - £120
XTR hubs with XT skewers + pair of 217's (not built) £120
I can get wheels built for £45/ea with DT double butted spokes.
Pair D521's £50 - £20/£30 new brake surfaces
XTR M910 hub set 32h for 8sp cassette (will only split hubs once buyer for each has paid).
Front hub NOS & never built but a few marks from storage.
Rear hub, 135mm (with orignal spacers each side so could be shortened to 130mm if required) shows evidence of second build in it's life, currently built into mavic D521 with plain gauge DT spokes, bearings perfectly smooth, I've ridden on this wheel for a bit, freewheel fine.
Propose to sell with the XT skewers which are quite a good match, M910 skewers are rarer than these hubs!!!
Pair of 32h Mavic 217 rims - enough life to be worth building again - £35
Proflex rear stays from 957, take the conical ended rear shock - £10
Onza Hox spd pedals, expensive when new, obviously used but boxed with manual, everything present, cleats - not worn out, bearings fine & serviceable when required, possibly shimano cleat compatible I can check this if it's important to you - sold £15
one of the frames has one of the corners cracked off, can't remember how.
Any questions just ask.
Alex
