Rod_Saetan
Old School Grand Master
- Feedback
- View
Recently removed from a 1988 Bridgestone RB2 this comprises:
Shimano Exage SPORT Front mech; Rear mech; Cranks with decent Bio-Pace rings; DT shifters; Aero brake levers with black hoods; Front and rear brake calipers (recessed bolt); Front and rear hubs only (36 hole, screw-on rear); Aluminium (I think) SR Custom stem and steel Sakae CT drop bar.
Condition is used, with some corrosion, it hasn't been terribly well cared for (by the previous owner I should add) but it was working well for the 25 miles or so I rode it, chainrings still have life left, so do what I suspect are the original brake pads, hubs ned a service, bar looks good where you can see it, the rest is covered in tape residue.
£25 plus postage (fairly hefty, I would guess £10 ish) or collect in East London - a pretty cheap way of getting something up and running.
Pics available if you wish.
Shimano Exage SPORT Front mech; Rear mech; Cranks with decent Bio-Pace rings; DT shifters; Aero brake levers with black hoods; Front and rear brake calipers (recessed bolt); Front and rear hubs only (36 hole, screw-on rear); Aluminium (I think) SR Custom stem and steel Sakae CT drop bar.
Condition is used, with some corrosion, it hasn't been terribly well cared for (by the previous owner I should add) but it was working well for the 25 miles or so I rode it, chainrings still have life left, so do what I suspect are the original brake pads, hubs ned a service, bar looks good where you can see it, the rest is covered in tape residue.
£25 plus postage (fairly hefty, I would guess £10 ish) or collect in East London - a pretty cheap way of getting something up and running.
Pics available if you wish.