A change of plans with the ND means that the suntour parts are up for grabs.. All are 89-90 era, as fitted to Muddy Fox to name but a few, items are as follows:
Accushift thumb shifters, 6 speed (but will work as 7 speed with friction setting)
Dia Compe XCM brake levers
X1 front mech 28.6 clamp, bottom pull
Accushift 3040 (XCM) rear mech
XCM 170mm cranks with oval 48-38-28 rings
MKS resin pedals...not the greatest but period correct
Everything has been well used but all the parts work fine and have all been cleaned and regreased only a few months back, in fact I'm still using the shifters and brake levers! Only bad points are the pedals may need a bit of effort to remove from the cranks - I've added penetrating oil since but haven't attempted anything more so far in order to shift them. The rear mech barrel adjuster has also sheared off, although the mech seems to work fine with it in place once the cable is tightened. Pics below and parts can be seen as fitted here http://www.retrobike.co.uk/forum/viewto ... nigel+dean
I'll sell the lot for 25 quid posted
Accushift thumb shifters, 6 speed (but will work as 7 speed with friction setting)
Dia Compe XCM brake levers
X1 front mech 28.6 clamp, bottom pull
Accushift 3040 (XCM) rear mech
XCM 170mm cranks with oval 48-38-28 rings
MKS resin pedals...not the greatest but period correct
Everything has been well used but all the parts work fine and have all been cleaned and regreased only a few months back, in fact I'm still using the shifters and brake levers! Only bad points are the pedals may need a bit of effort to remove from the cranks - I've added penetrating oil since but haven't attempted anything more so far in order to shift them. The rear mech barrel adjuster has also sheared off, although the mech seems to work fine with it in place once the cable is tightened. Pics below and parts can be seen as fitted here http://www.retrobike.co.uk/forum/viewto ... nigel+dean
I'll sell the lot for 25 quid posted
