SOLD: Pace RC30's, 1'' threaded

henristig

Old School Hero
Feedback
View
These have now become superfluous due to my current bike sporting a 1 1/8'' headtube.

Good usable condition but in no way pristine. I'd put this on a daily driver. Noticable chrome pitting on the right leg. The crown has some marks as pictured, the biggest gripe being that some doofus has banged on the right leg at some point, leaving the top of the leg/crown scuffed.

The critical measurements are; 390mm A-C, 158mm steerer of which 30mm is threaded

£80 + postage, located in Scandinavia

CJy44z6.jpg

BeTH3Wo.jpg

ox6XoRW.jpg

SYJHPWw.jpg

8lUYQvI.jpg

ePAhXDm.jpg

D3EpejS.jpg
 
Re: FS: Pace RC30's, 1'' threaded

reanimation":1ez8m7p5 said:
You know you can swap new steerers in? Swapped mine over. Cheers

If the crown is 1”1/8 then the 1” steerer fitted will have a shim on it; and swapping to a 1”1/8 steerer is simple.

If there’s no shim then it’s a 1” crown.
 
Re: FS: Pace RC30's, 1'' threaded

jimo746":354vjcbf said:
reanimation":354vjcbf said:
You know you can swap new steerers in? Swapped mine over. Cheers

If the crown is 1”1/8 then the 1” steerer fitted will have a shim on it; and swapping to a 1”1/8 steerer is simple.

If there’s no shim then it’s a 1” crown.

Ah, that makes sense. Something to watch out if I'm ever chasing another set. Cheers
 
Re:

Thanks for the knowledge guys! Price drop to £80!

I think this is a 1 1/8th crown with a shim judging by the photo of the crown race area, which looks like a shim going into the crown... Not sure though as I haven't taken them apart!
 
Re: FS: Pace RC30's, 1'' threaded

Its a 1" crown! A 1-1/8" steerer wont fit ;)

mark
 
Back
Top