- Feedback
- View
These Rond's are believed to be HydroPro's going by archive photos here on RB.
These photo's aren't the best, I can do more if any interested parties should request them.
1 and 1/8th steerer threadless 175mm. 410mm A2C.
Forks are missing one original crown bolt (sure i have one cut to size lying around) and one of the cantiboss plates seems to have been replaced with a non original part (someone's tried to restore these and fettle them in the past)
Other notable points; sag with no resistance a few mm when weighted, and again will probably need elastomers.
They are in good aesthetic condition and need someone with the know how (perhaps Mr. Fluffy Chicken? ) to get them back to their original CNC'd glory.
Due to their rarity regardless of functionality i'd like £40
Now £35 posted - last chance before e-bay.
These Magnums (SOLD)came straight off a '95 Pine Mountain as they are seized somehow.
They have a 1 and 1/8th 135/30 thread.
Previous owner tried to remove top-caps with tools it would seem without first loosening crown bolts and as a result they are chewed up somewhat.
Having not looked inside and having no real history we can only speculate as to internals - let's say they need elastomers a little grease and ideally for aesthetics a new pair of topcaps.
I'd keep them myself but have too many forks in need of work and too many bikes here so letting most of my stash go over the coming weeks.
after £25
These photo's aren't the best, I can do more if any interested parties should request them.
1 and 1/8th steerer threadless 175mm. 410mm A2C.
Forks are missing one original crown bolt (sure i have one cut to size lying around) and one of the cantiboss plates seems to have been replaced with a non original part (someone's tried to restore these and fettle them in the past)
Other notable points; sag with no resistance a few mm when weighted, and again will probably need elastomers.
They are in good aesthetic condition and need someone with the know how (perhaps Mr. Fluffy Chicken? ) to get them back to their original CNC'd glory.
Due to their rarity regardless of functionality i'd like £40
Now £35 posted - last chance before e-bay.
These Magnums (SOLD)came straight off a '95 Pine Mountain as they are seized somehow.
They have a 1 and 1/8th 135/30 thread.
Previous owner tried to remove top-caps with tools it would seem without first loosening crown bolts and as a result they are chewed up somewhat.
Having not looked inside and having no real history we can only speculate as to internals - let's say they need elastomers a little grease and ideally for aesthetics a new pair of topcaps.
I'd keep them myself but have too many forks in need of work and too many bikes here so letting most of my stash go over the coming weeks.
after £25