Mavic chainset now sold Wheels now sold

Bultaco370

Retro Guru
Is there any interest in a Mavic starfish 631 chainset? The drive side is in pretty good condition, but the left arm has a crack at the bottom bracket end. I have been using it on a turbo bike with no issues but I personally would not use it on the road. It is 170mm and will have 49/38 chainrings fitted. I will chuck in a 54 tooth chainring as well. £20 posted in the UK and I will put pics up shortly (the pic will only show the 49 ring as I haven't fitted the 38 yet). Also open to offers on this. SOLD

Also from this same turbo bike is a well used pair of wheels with Mavic threaded 501 hubs and Mavic 32 spoke clincher rims. The hubs aren't too bad but the rear rim is running well out of true, hence the use on the turbo. Currently fitted with a 6 speed Regina freewheel and 25mm Michelin tyres which are actually ok. £35 including postage in the UK and again I will put some pics up later. NOW SOLD

Pick up is definitely possible sometime over Xmas if you prefer and prices will be £15 for the chainset and and £20 for the wheels. I am located near Hinckley in Leicestershire.

Any interest?
 

Attachments

  • 90F80289-398E-400A-9E7B-ECF8C073DC8D.jpeg
    90F80289-398E-400A-9E7B-ECF8C073DC8D.jpeg
    336 KB · Views: 1,248
  • 1F05C320-9077-49EB-BFCD-9A25E3A549B5.jpeg
    1F05C320-9077-49EB-BFCD-9A25E3A549B5.jpeg
    351.5 KB · Views: 1,248
  • 1596C1B8-FF87-4C4E-8770-90EECE867948.jpeg
    1596C1B8-FF87-4C4E-8770-90EECE867948.jpeg
    250.7 KB · Views: 1,248

Bultaco370

Retro Guru
Re: Mavic chainset and wheels

Thanks for your interest, pics of wheels added. The hubs are a bit grubby but should clean up. The bearings feel fine.
 

Bultaco370

Retro Guru
Re:

Chainset pics
 

Attachments

  • B2F23C29-4284-4DED-956F-D9D8E93453A1.jpeg
    B2F23C29-4284-4DED-956F-D9D8E93453A1.jpeg
    300.8 KB · Views: 1,247
  • C6C9F57E-1C2B-44D6-9D62-16A77074C4ED.jpeg
    C6C9F57E-1C2B-44D6-9D62-16A77074C4ED.jpeg
    255.4 KB · Views: 1,247
  • 3A11975C-2A45-40EF-9E68-1AEFAB2BEF92.jpeg
    3A11975C-2A45-40EF-9E68-1AEFAB2BEF92.jpeg
    225.7 KB · Views: 1,246
  • C4724DA8-9A76-4492-A33A-A3E3927263DC.jpeg
    C4724DA8-9A76-4492-A33A-A3E3927263DC.jpeg
    365.3 KB · Views: 1,247

biking**besty

Dirt Disciple
Re: Mavic chainset and wheels

Hi Bultaco, I bought the D.A. freewheel from you recently. The wheels look like quite a project, so as you'd invited offers, £30 posted and as before regular PayPal, not the friends and family. Cheers, John.
 

Bultaco370

Retro Guru
Re: Mavic chainset and wheels

Hi John, yes, they are definitely a project. The freewheel is the best bit and if I had a removing tool I would have taken it off and sold it separately.

Your offer is fine, thanks. I need to get hold of a box, so please bear with me and I will let you know once I am ready to post. Would it be ok to leave that until after Xmas now? You don't have to send any money until I ship them.
 

biking**besty

Dirt Disciple
Re: Mavic chainset and wheels

Thanks so much B. And, yes, that's fine I'll await your update. Stay safe and enjoy the holidays. J.
 
Top