Search results

  1. KenG

    Sakae crank dust caps

    Hi Looking for a pair of chrome (preferably) Sakae crank centre caps. What have you got lurking in your spares box Regards Ken
  2. KenG

    Flat bar conversion

    Hi All After much chewing over I've decided that to complete my 1973 Fred Baker restoration by going down the flat bar route, at 60 with a bad back I think it's time, so I'm looking for some nice riser bars , flat bar levers and a 22.2 riser stem, thanks in advance. KenG
  3. KenG

    5 speed screw on freewheels

    Hi Looking for 2 X 5 speed freewheels,must be screw on. Prefer 14-24 but would consider 14-28. Many thanks Ken
  4. KenG

    27 inch wheelset

    Hi Looking for a pair of 27 x 1 1/4 inch wheels, I already have a pair of Dawes wheels but would like something a little nicer for a special touring build. cheers Ken
  5. KenG

    Wheelsets and cranks

    Hi I'm looking for 2 pair of 700c wheels for 1980's Fred Baker and Mercian KOM, ideally clinchers with 5 or 6 speed blocks also cranks for same, triple or double welcome. Cheers Ken
  6. KenG

    U brake

    Hi Looking for a u brake suitable for an 86 Koga miyata ridgerunner, deore,XT, what have you got. Thanks Ken
  7. KenG

    XXL adventure/touring frame

    Hi I'm looking for a XXL adventure/touring frame, I'm 6ft 5 so it has to be large, anything and everything considered. Cheers!
  8. KenG

    XL frame and forks

    Hi looking for a XL frame and forks to build up into a gravel/expedition tourer. Steel preferred,size 20inch and above,the bigger the better.
  9. KenG

    Large frame

    Hi Looking for a large steel frame and forks ,big enough for a 6ft 5 clydesdale, I want to make it up into a gravel path/tourer type bike,so probably something 21" and above Would consider a complete bike in exchange for my two vintage frames offered over on the road section under components...
  10. KenG

    Two classic frames NOW WITHDRAWN

    Hi After much debate I've decided to let both of my vintage frames go, first on is a 25 inch (63cm) 1980 Mercian King of Mercia, stripped and professionally sprayed in two pack yellow /burgundy, genuine Mercian/531 Reynolds decals applied and then the whole lot clear coated. The second is a...
  11. KenG

    Free bike boxes

    Free to anyone in the Hull area are 2 large bicycle boxes, I bought a couple of bikes from chain reaction and they came in to very sturdy boxes, it seems a shame to break them up and throw them out if anyone could use them, pick up only unfortunately. Thanks
  12. KenG

    Free

    Free to anyone in the Hull area are 2 large bicycle boxes, I bought a couple of bikes from chain reaction and they came in to very sturdy boxes, it seems a shame to break them up and throw them out if anyone could use them, pick up only unfortunately. Thanks
  13. KenG

    26.4 seat post wanted NOW SORTED

    Hi As above I'm looking for a 26.4 seat post ,for a 1973 Fred Baker. Alloy only please,want to spend around £30 posted. Cheers Ken
  14. KenG

    27.2 seat post x2

    Hi Looking for two 27.2 seat posts, one for a touring type and the other a racing frame. Anything considered but not Campag,both bikes are running Shimano. Silver, length around 200mm,budget up to £30 each, Cheers
  15. KenG

    XL muddy fox frame/forks

    Looking for a 21or 23 inch Muddy fox frame, would prefer Explorer,Pathfinder etc but must be a steel frame. Many thanks Ken
  16. KenG

    Large frame and forks NOW SORTED THANKS

    Hi Looking for a large frame and forks,the bigger the better as I'm 6ft 5 with a 34 leg. Anything considered Thanks Ken
  17. KenG

    Deore DX or LX rear hub

    Looking for a rear hub for my 1991 GT Korakoram, I'm looking for a donor hub to replace the damaged seals and cover on mine. I'm assuming the LX has similar internals . External condition not important as long as the internals are good/complete. Cheers
  18. KenG

    Large frame/bike

    Looking for a large complete bike or frame,the bigger the better,I'm 6ft 5 with a 34 inside leg and will be using it for touring. I dallied with road frames and have 2 refurbished frames, 1 Mercian KOM and 1 Fred Baker,both beautiful frames that I would consider swapping for a suitable MTB...
  19. KenG

    Titlist front mech

    Hi, I'm looking for a Shimano Titlist front mech, first gen not the uniglide one. Many thanks
  20. KenG

    700c wheelsets x2

    Looking for two pair of wheels for my 1980 Mercian and Fred baker, both frames are 120 oln, prefer 36 hole but everything and anything considered.Looking to go 5 speed with these wheels. Thanks
Top