Search results

  1. S

    1993 Rossin Performance

    1993 Rossin Performance by floody31, on Flickr Just finished piecing this together. Bought the frame NOS from Brick Lane Bikes mid 2018 after I broke my Colnago, with the intent of just swapping the components, it's never that easy, the frameset fought me the whole way. Mostly guessing it's...
  2. S

    XTR HP M901 1-1/8 headset new in box

    XTR HP M901 headset, 1-1/8 threaded, never assembled, new in box with factory Shimano grease pack ( ! ) SOLD SOLD SOLD $100USD inc tracked shipping to US/EU/UK SOLD SOLD SOLD Paypal goods and services please HP M901 by floody31, on Flickr HP M901 by floody31, on Flickr MP M901 by floody31...
  3. S

    It's 1996... 7410 or 7700?

    I'm about to commence re-re-rebuilding my '96 Specialized M2 Pro. I can't decide between 7410 and 7700. I like the 7410 STI and some of the finishes better, and I like the ability to bring in some outside stuff like an aftermarket BB; I like the 7700 derailleur, crankset, standard 9 speed...
  4. S

    Bordeaux Gold Hudz for Campagnolo Ergo G2 NOS

    I am looking for a set of NOS ODI Hudz in Bordeaux Gold for Campagnolo Ergo G2. I'm in Australia, so you will need to post them to me at my cost, and paypal would be the only reasonable way I can get the money to you if you're outside AU.
  5. S

    WTB: Tange Switchblade 1-1/8" threaded, short-ish steerer

    Looking for a 1-1/8" threaded Switchblade with a short-ish steerer tube (it's for my Haro Extreme which has a 3.5" long headtube). I'm fine with cutting down, I think the stack height plus headtube length for the Extreme with a Tioga headset is about 120mm so I need a steerer that is at least...
  6. S

    1991 Haro Extreme Comp

    I've been tinkering away with this for a couple of months, gradually getting closer to rideable. A mate of mine picked up the somewhat worse for wear remains in this condition. Eons ago it had been stolen and recovered, returning with a coat of cheap silver paint; despite the thief having...
  7. S

    36h Shimano LX M560 hubs

    Looking for a pair of LX M560 hubs, cosmetics not terribly important but they need to be FULLY functional and 36 hole. It would be great if they had the correct skewers too. I would definitely prefer used in good functioning condition over NOS; the bike they are going on looks rough and new...
  8. S

    Cycle Craft pro XL

    I was thinking of doing a mid-school project so I bought this frameset out of the USA on a bit of an impulse. Single bend stays and graphics style mean it was built sometime between 1987 and 1992. Paint is rough, but original, so I'm keeping it that way for now. Went with a fairly...
  9. S

    Mavic D321 Disc rims, 32h, pair, as-new.

    Pair of D321 Disc rims in 32h, circa 1998. Were a 'NOS' new bike take off, have had tyres and rimtape fitted, were never ridden. Wheelset has been split, selling rims bare. Condition is close to flawless. There is one gouge on a decal and one nick on the rim edge, both on the same rim. There is...
  10. S

    DMR Trailstar mk1 slalom bike project

    I'm just embarking on a new project around a very early mk1 Trailstar frame I bought recently. The idea is it will be a pretty much top spec dual slalom bike circa 1998. I am refinishing the frame in the original red, just sorting out headtube and chainstay decals then it's under the blaster...
  11. S

    WTD: Seat collar with cable guide from Balance USA BMX

    As the title suggests, I have been searching in vain for a Balance USA seat collar and cable guide. I am looking for one from a Killer B or Patriot, they are 31.8 and were on those bikes from '95-97. Colour is unimportant, I will refinish, but I need both the collar and the brake guide. Pic...
  12. S

    WTD: Judy v-brake arch

    Chasing a Judy arch without cable hanger (V-brake/Magura arch). Tidier condition the better. DH red would be perfect, but colour is not thaaaat important. Would consider complete '97 Judy DH fork if 1-1/8 threadless and with good stanchion tubes. I am in Australia but will pay post.
  13. S

    WTD: DMR Chieftain Mk1 or Mk2 crankset, Trailstar Mk1 hanger

    Looking for a DMR Chieftain Mk1 or Mk2 crankset. Needs to be chrome, and mtb BB size. Spindle, arms and cups need to be presentable and usable, bearings not important as long as spacers etc are complete. 5 arm spider would be good, not essential. Also chasing a derailleur hanger for a...
  14. S

    NOS White Bros wipers for Rockshox Judy forks

    Looking for a NOS set of White Bros Judy wiper seals/wipers/swipers. Anybody able to help out?
  15. S

    Getting a brake onto a Rockshox DHO!

    Frustrating b_st_rd of a thing. I'm trying to get a set of Shimano M755 4 pots onto a DHO. Direct mounting the caliper with a 160mm rotor almost works but it needs to be spaced toward the hub, so I think apart from the spacing it's basically IS. Tried a really old Boxxer 203mm mount with a...
  16. S

    1990 Shogun Prairie Breaker Team Issue

    Recently picked this up from a mate, wanted one for a fair while. It's the 1990 Team Issue, frame is Tange Prestige, build is full XT with M-091 STI, Strong seatpost, RM17 Arayas and Tioga Avenger fork/Avenger OS headset/T-Bone Prestige OS/Prestige bar/Biogrip Pro (Shogun was a house brand in...
  17. S

    Formula brakeset from GT STS-DH in VGC

    Looking for a set of Formula Evoluzione brakes, specifically from a 1997/1998 GT STS-DH or LTS-DH. The spec is front: 4 bolt 180mm rotor (large PCD), IS caliper mount on fork. Rear is 145mm 4 bolt rotor (small PCD), 48.55mm caliper mounting. These were red as OEM fitment. It seems nothing else...
  18. S

    Mavic M121CD, D321 or D521

    Chasing pair of NOS or VERY clean Mavic 121, 321 or 521s in ceramic finish. 32 hole. Will pay good money, you need to be able to ship. Last link in a catalogue build, help me!
  19. S

    WTB Specialized 1" steel fork, Allez, Epic etc

    Looking for a Specialized 1" threaded road fork, preferably off a circa 52-54cm frameset so that it will fit my 54cm M2 Pro with minimal cutting, I'm a bit frightened of the circa 1996 carbon fork on there. Red paint in good shape would be a dream, but I can repaint anyway. PM me if you can...
  20. S

    Panaracer Magic tires + grips job lot, other skinwalls.

    2x NOS 2.10 Wire Panaracer Magics (F+R), good condition, slight color variation between them. NOS Warrior Panaracer Magic grips to match tires, still on card but card in rough condition. $120AUD + Shipping, job lot. Pics to come. SOLD 1x Shop soiled 1.90 Wire Panaracer Magic (R), sidewalls...
Top