Keith Bontrager

From Retrobike Wiki
Jump to: navigation, search

Keith Bontrager (born December 18, 1954) is a motorcycle racer<ref>Template:Cite news</ref> who became a pioneer in development of modern mountain bike. Between 1980 and 1995 he was president of Bontrager Cycles. Bontrager continues to develop components for Trek, which bought his company.



Bontrager started in 1965 by building lawnmower engine powered mini-bikes.

In 1969 he began racing motocross, funding his racing through motorcycle repair work. Between 1975 and 1981 he designed, built and tuned motocross and road racing and drag racing motorcycles. Motorcycles he tuned won national road racing titles in production and 250 GP classes.


In 1978 Bontrager became attracted to cycling and in 1979 built his first road bike. With his motocross background he was attracted to mountain bike cycling. In 1980 he built his first mountain bike frame and founded Bontrager Cycles in Sunnyvale, California. He couldn't have done any of this without the supportive help of his three daughters and lovely wife.

In 1984 he cut 700C (ISO 622) 40-hole Mavic MA-2 tandem rims to the circumference of a 26" rim, re-rolling them to create a 32-hole 26" rim.

Bontrager rims were the first lightweight yet strong mountain bike rims, albeit using a profile intended for road racing bicycles. Mavic provided MA-40 MTB rims for some time. Bontrager went on designing lightweight rims, manufactured by Weinmann USA. Several were introduced but never went into high production as the Weinmann plant suffered a fire.

The design of Bontrager frames was based on his studies at the University of California, Santa Cruz and experience as a motocross mechanic. While other manufacturers developed frames out of (oversized) aluminium, titanium, or carbon-fibre, Bontrager believed steel was not outdated but that its design and production could be improved. Joints could be strengthened by gussets to distribute loads and reduce the weakening of brazing and welding. He found areas in which joints could be made by bonding and riveting, i.e. the frames made between 1989 and 1994 had cable stops milled out of Aluminum that were bonded and riveted to the top tube. Frames made at Bontrager's Santa Cruz workshop had two-piece seat stays made of larger diameter tubing in the upper area which added torsional stiffness around the brake-bosses, while the smaller tubes in the lower area reduced weight and vertical stiffness of the rear triangle leading to better damping of hits.

Bontrager published articles on bicycle design and construction, ranging from the effects of TIG welding on the tubes to the flaws in the accepted sizing methods of the day.

In 1987 he designed and patented the composite fork crown. This used an aluminum fork crown that clamped the fork blades and the steerer instead of using welds or brazing. This design was used on the Rock Shox RS1 suspension fork, and Bontrager's own rigid fork, the Switchblade. Bontrager's belief in avoiding heat affection of the tubes led to versions of the Switchblade with bonded and riveted dropouts and brake bosses leading to a fork with no welding or brazing. This retained the strength gained by tempering the tubing.

In 1992 Bontrager Cycles expanded from a one-man shop to a limited production facility. In 1993 they started to produce handlebar stems. In 1995 Bontrager's business partner, Hans Heim, left to join Santa Cruz Cycles, and put his share of Bontrager Cycles up for sale. Trek acquired Bontrager Cycles and hired Bontrager as president.

Bontrager production split in two. The frameshop in Santa Cruz continued to manufacture the high-end mountain bike frames (the Race and Race Lite models), the Road Lite (road race), the cyclo-cross frames, and later a BMX frame. At this same time, Bontrager stopped using two-piece seat stays on mountain frames in favor of a single tapered tube. The Ti Lite, a titanium version of the mountain bike frame, was made by tubing manufacturer Sandvik. At the same time, the Privateer, an entry-level frame, was designed using the same True Temper tubing as the Santa Cruz-made-frames but made at Trek's plant in Waterloo, Wisconsin with small design changes.

Bontrager took on product development at Trek, designing handlebars, handlebar stems, bar ends, seatposts, tires, cranksets and rims and wheels.

By the end of the 90s production techniques for aluminium frames allowed cheap mass-production. Hardtail steel frames went out of fashion. Production of Bontrager frames ceased in Santa Cruz and Wisconsin.

Bontrager continues to work with Trek to develop wheels and components for mountain, road and triathlon bikes. The components were used by the US Postal, Discovery Channel, Leopard Trek, Trek Livestrong, Science in Sport and Trek VW road cycling teams. Triathletes and Ironman champions have used the components and these include Chris Lieto, Normann Stadler and Julie Dibens - to name but a few.


Bontrager has competed in 24-hour mountain bike races and events such as the Three Peaks Cyclo-Cross.


Bontrager majored in Physics at UCSC.

Awards and recognition

Bontrager was inducted into the Mountain Bike Hall of Fame in 1994.<ref>Template:Cite web</ref>

Personal life

Bontrager is married to Laura and is father of three daughters: Megan, Anna, and Juliana.

External links