Retrobike Forum Index

It is currently Thu Jan 24, 2019 12:18 am

* Login   * Register * Search  * FAQ



Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Sun Jan 13, 2019 1:59 pm 
Dirt Disciple

Joined: Sun Aug 19, 2012 5:58 pm
Posts: 20
Location: Finland
I've enjoyed a lot reading the build threads over here and thought I also could share my current project. I've been making slow progress with it over the past couple of months and it's getting there but it'll still take a month at least to get it ready.

My son had been asking for a full suspension bike since last spring and in August I started looking for a suitable bike for him. I hoped that if I waited patiently I could get an "obsolete" 26er for a reasonable price. Weeks went by and all the cheap bikes I found were the wrong size but then I came across a medium 2012 Cove Hustler with a RS Revelation dual air forks and a Fox RP23 shock for less than 200eur.

I messaged the seller and learned that the frame was very well used with worn bearings and that it had had an extra gusset welded to the toptube-seattube junction by some previous owner and that the forks worked but the stanchions had some scratches. I decided to take chance with it since the price was so low and so after a few days I received the package.

Here's the frame. It had a lot of scuffs and scratches and the added triangular gusset at the end of the toptube had been painted with a brush in slightly different shade of white.
Attachment:
IMG_20181001_093259-1280x960.jpg
IMG_20181001_093259-1280x960.jpg [ 282.15 KiB | Viewed 342 times ]


Top
 Profile  
 
PostPosted: Sun Jan 13, 2019 9:05 pm 
Dirt Disciple

Joined: Sun Aug 19, 2012 5:58 pm
Posts: 20
Location: Finland
After thoroughly checking what I had bought I started planning how I could get it back to life. The frame looked worse "in flesh" than in pictures and if I wanted it to look good once again new paint would be the only way to go.

The fork was holding air and didn't leak oil either but there indeed was a few scratches on the stanchions. Also the crown and the legs had scratches, scuffs and cable rub marks.

On the bright side the shock had been serviced frequently and was in good shape but the mounting hardware and the frame bearings were badly worn so I started disassembling the frame and making a shopping list for the different bearings etc.


Top
 Profile  
 
PostPosted: Sun Jan 13, 2019 9:39 pm 
Dirt Disciple

Joined: Sun Aug 19, 2012 5:58 pm
Posts: 20
Location: Finland
Since I was trying to keep it cheap I decided I would paint it with spray cans and try to use the original paint as a base. I removed the stickers and filled bigger scratches and marks on the frame with automotive filler. After the filler had dried I sanded it down and also sanded the original paint a little bit to give the new paint something to grip to.

After covering the threads etc I started to paint. I chose white as my main color because I thought that if the paint chips it wouldn't look too bad with the white original color underneath :)

I followed the instructions on the can and applied light coats a few minutes apart. I was pleasantly surprised that the 24h drying time written on the can was true and I could actually sand the paint the next day if needed! I spent a few nights perfecting the coat and managed actually to get a very nice finish with this paint in my dusty and dirty garage.

Here's the paint I used, it's some kind of alkyd resin made by Dupli-Color:
Attachment:
IMG_20190103_142756-01-1280x1706.jpeg
IMG_20190103_142756-01-1280x1706.jpeg [ 233.34 KiB | Viewed 314 times ]


Attachment:
IMG_20190107_083625-01-1280x960.jpeg
IMG_20190107_083625-01-1280x960.jpeg [ 247.92 KiB | Viewed 314 times ]


Top
 Profile  
 
PostPosted: Mon Jan 14, 2019 12:41 am 
Retro Guru
User avatar

Joined: Mon Feb 10, 2014 3:34 pm
Posts: 702
Location: Sweden
I like repaints ;) and white bikes are always goodlooking!
Did you remove those dustiwipers from your fork legs before painting?


Top
 Profile  
 
PostPosted: Mon Jan 14, 2019 6:01 am 
Dirt Disciple

Joined: Sun Aug 19, 2012 5:58 pm
Posts: 20
Location: Finland
Dare wrote:
I like repaints ;) and white bikes are always goodlooking!
Did you remove those dustiwipers from your fork legs before painting?

Thanks! A new set of seals and wipers is coming so I used the old ones to keep the paint from getting inside the leg :D


Top
 Profile  
 
PostPosted: Mon Jan 14, 2019 11:31 am 
Retro Guru
User avatar

Joined: Mon Feb 10, 2014 3:34 pm
Posts: 702
Location: Sweden
In my experience it is always better to take old wipers out and then use masking tape to cover the holes.


Top
 Profile  
 
PostPosted: Mon Jan 14, 2019 4:19 pm 
Dirt Disciple

Joined: Sun Aug 19, 2012 5:58 pm
Posts: 20
Location: Finland
Dare wrote:
In my experience it is always better to take old wipers out and then use masking tape to cover the holes.

Ok, i just stuffed some old rag to the hole and put the wiper on top of it, hopefully not too much paint has found it's way under it.


Top
 Profile  
 
 Post subject: Re:
PostPosted: Tue Jan 15, 2019 9:31 pm 
Dirt Disciple

Joined: Sun Aug 19, 2012 5:58 pm
Posts: 20
Location: Finland
With everything being so white, i started thinking about other colors.

I had already bought a pair of black NOS DT Swiss X1900 wheels with bright green decals so I decided to try to match my frame decals to that green. I bought a Cove vinyl sticker set from ebay and a RS Rev set for for the forks too from the same seller. I haven't compared the stickers side by side with the rim decals but I hope the vinyl green wont be too far off from the green on the rims.

With the white frame and green graphics I still felt I needed something. I made a few sketches and decided I would add some black stripes to the frame.

In my opinion a color scheme with only two colors (one for frame, one for decals) has to have a really beautiful main color and finish and/or somehow extraordinary decals to make a compelling bike. I don't have either, so I added black.
Attachment:
IMG_20190114_221305-01-768x1023.jpeg
IMG_20190114_221305-01-768x1023.jpeg [ 232.29 KiB | Viewed 172 times ]

Attachment:
IMG_20190114_221405-02-768x1024.jpeg
IMG_20190114_221405-02-768x1024.jpeg [ 210.26 KiB | Viewed 172 times ]

Attachment:
IMG_20190115_191858-01-768x1024.jpeg
IMG_20190115_191858-01-768x1024.jpeg [ 117.43 KiB | Viewed 172 times ]

Attachment:
IMG_20190112_134047-01-1280x960.jpeg
IMG_20190112_134047-01-1280x960.jpeg [ 177.32 KiB | Viewed 172 times ]


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: 8690q, Madmax1993 and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

About Us

Follow Retrobike

Other cool stuff

All content © 2005-2015 Retrobike unless otherwise stated.
Cookies Policy.
bikedeals - the best bike deals in one place
FatCOGS - Fat Chance Owner's Group

Powered by phpBB® Forum Software © phpBB Group