Clearout - XT, LX, Mechs, Stems, Tyres, XCD, Turbo, Decals

drcarlos

Retrobike Rider
Gold Trader
Feedback
View
Amalgamation of all my bits for sale.

I am after the following items in trade, so prices can be worked out if you have any of these items.

Silver V8 Pedals

Mechs and shifters

IMG_20120102_162802.jpg


Deore LX M550 Rear Mech, good working order and minor scratches, would scrub up really well.
£11 inc postage (sold)

STX-RC MC-38 8 Speed compatible, good working order and condition with logo intact.
£9 inc postage (sold)

Deore XT M735 Shortie, scuffed and scratched but mechanically good (pivots and springs) needs new jockeys and a clamp bolt.
SOLD

Deore XT M736 Front mech, top pull 31.8 clamp, excellent condition with only minor wear to the cage.
SOLD

Mountain LX front shifter, pics on request £5.

XT M095 STi's, fair condition with a a few marks and some chips on the levers, 7's shifter perfect, the adjuster thread in the 3x shifter is worn and I have put in another shorter adjuster that seems better but has less adjustment. For Cantis, but I am told that they can be used for V's.
Sold

Stem, bars and headsets

IMG_20120102_163403.jpg


Tioga Alchemy 1 1/8" aheadset, new and never ridden, only fitted and removed.
£4 inc postage (sold)

FSA roller bearing 1 1/8" headset, all alloy, nice and light, some damage to crown race seal cover from removal and damage to flats on top nut from a messy installation, but worked well and was smooth when last used.
£4 inc postage

Giant alloy stem 110mm reach, about 10 degrees of rise.
£4 inc postage (sold)

Giant flat bars, nice and light butted bars, showing signs of crimping from use of bar ends at both ends.
SOLD

Selling some parts from my brothers old Dawes Kickback (Handbuilt Reynolds 500 frame is also for sale)

IMG_20120219_101510.jpg

IMG_20120219_101500.jpg


Black Turbo Saddle 1988, scruffy £12 posted (kept)

IMG_20120219_101558.jpg


Exage Trail Chainset with Steel Biopace rings, good condition tapers and threads. £15 Posted.
1" Quill stem with cable hanger £7 posted.

IMG_20120219_101642.jpg


Suntour XCD 6 Speed Thumbies a little bit of scuffage on the plastic adjusters. £13. (sold)
Mountain LX Levers (shifter mounts cut of sadly but hoods OK) £6 posted.
Mountain LX front mech 28.6 BP. £6 posted.
Original GT A'me grips uncut and in good condition £10 posted

IMG_20120219_101530.jpg


Flat swept back alloy Muddy Fox alloy bars, cut down to 560mm originally from 88 Roadrunner or Courier. £7 posted.

IMG_20120224_171935.jpg


Some spare 1993 Kona decals (by gil_m)
Headbadge £2 inc P&P
Velocity Stem Decals £3 inc P&P
P2 Fork Decals £5 inc P&P

All payments by paypal please with buyer paying fees.
Fee calculator here: http://www.tutv.co.uk/fresh/bitsandpiec ... alcost.php

Carl.
 
Apologies for being a troublemaker, but are you 100% the stem's for a 1" steerer? Sure I had a '91 Hahana that was 1 1/8 :? Should Have 22.2 stamped on it if it's for one inch (25.4 if it's for 1 1/:cool: - which sounds wrong but I guess John means he wants it to fit a 1" steerer, not actually be 1" itself & therefore fit a 1 1/8" steerer.

Really hope that's comprehensible and helpful :oops: :LOL:
 
elPedro666":3h7nc14g said:
Apologies for being a troublemaker, but are you 100% the stem's for a 1" steerer? Sure I had a '91 Hahana that was 1 1/8 :? Should Have 22.2 stamped on it if it's for one inch (25.4 if it's for 1 1/:cool: - which sounds wrong but I guess John means he wants it to fit a 1" steerer, not actually be 1" itself & therefore fit a 1 1/8" steerer.

Really hope that's comprehensible and helpful :oops: :LOL:

Here's the bike:

11.jpg


15.jpg


Check the headset for the Hahanna :)

Carl.
 
Back
Top