1993 Zaskar Build
- Thread starter Ian W
- Start date
I have an XT UN73 113mm BB.
Link here, think the guy still has some.
http://www.retrobike.co.uk/forum/viewtopic.php?t=123353
PS my Zaskar frame is 08935428 and has 94 decals so similar age to GM's
Link here, think the guy still has some.
http://www.retrobike.co.uk/forum/viewtopic.php?t=123353
PS my Zaskar frame is 08935428 and has 94 decals so similar age to GM's
LeeDevelopment
Old School Grand Master
- Feedback
- View
I don't think those Z1's look out of place at all, plenty of Zaskars had those forks. What's the seat post at the moment? Dare I suggest a black Syncros ones?
SeeingisBelievingGTMuseum
Old School Grand Master
- Feedback
- View
MADJEZ":x5tl6tzf said:
Welded cable stops or riveted?
Welded ones.
While I think of it, this is my frame. I thought these were 94 original decals.
Trying to sort out some new ones with Gil-m but the ones he has are
different. Did they use just one set of decals per year (apart from the
coloured frames, or did they just use what they had in stock.
While I think of it, this is my frame. I thought these were 94 original decals.
Trying to sort out some new ones with Gil-m but the ones he has are
different. Did they use just one set of decals per year (apart from the
coloured frames, or did they just use what they had in stock.
mikeekim89
Old School Grand Master
The cable isn't in the right place. Do that first then try? Fiddle with the adjusters too? I doubt the axel is at fault. There should be 5-15mm free space at the side of the chainstays where the crankends are. Take a picture, the space should show us more 
- Feedback
- View
Ian W":u6xobed3 said:Ian W":u6xobed3 said:
Anyone shed any light if this could be my problem
Its hard to imagine the extra 3mm on a 113mm making much difference :?
try the mech designed for compact chainsets first, then start worrying if it doesnt work.
