vitus info

mikee

Gold Trader
MacRetro Rider
GT Fan
Feedback
View
hello
i'm new here
was at my lbs today and in the trad-in rank was a vitus
blue and polished ali lugged
some campag parts and ergo shifters
steel forks and mis-matched wheels
so i asked and the shop owner (my mate) said it had been built as a winter
hack by the saturday boys dad ,a new b/b block and chain
mine for a ton

probably going to buy it ,but what do you think ?

i dont normally do road bikes but macretro are doing some road stuff
next year and i might start commuting on it
worthwhile and retro ?

thanks in advance
mike
 
A ton? Overhere that is 100.000 euro. Sounds a bit steep to me :roll:

A steel fork for you say. Probably the original one was broken at some point. I hope it was not painfully discovered during a ride downhill or halfway a crossing.
 
100 quid or 116 euro

as a functioning bike i think its worth it
just want to know what you guys think
 
Vitus are bonded aluminium rather like Alan. I don't know for sure but Alan tubes are also screwed into the lugs. I can vouch for the ride of my Alan. Nice and springy but in a good way. Make sure there is no movement in any of the lugs when gently flexed.

The Campagnolo stuff should work fine. Are the brakes dual pivot? If not you will certainly notice the difference with your MTB!

The most important measurement on a road bike is length. As a rule of thumb if you sit on the saddle with you hands on the hoods and look down, you shouldn't be able to see the front hub.

A ton sound reasonable to me.
 
thanks ,i'll pop up in a bit for a better look

ALAN ,if you look in the b/b shell or headtube you can see or at least feel
the threaded sections ,i have an ALAN built mtb
 
have a pic of my Vitus for reference

later model with 'normal' seatpost clamp (seatpost is 25mm)

earlier models have a grub screw to secure the post

ride is stiffer than and better than I was lead to believe - I've wanted one for a long time and now its here I could do with a slightly bigger frame.

vitus_update_632.jpg
 
this is an early one with the grub screw seat clamp

was too busy to go and see it again so will be back up on tuesday

LGF that looks a lot better than this one
 
I had always heard that the Vitus frames with the Grub screw were the later frames and the ones with the standard type of seatpost clamp were the earlier models? So which is it?
 
There is a great link to 80's Vitus brouchure on the equusbicycle website - Just purchased a vitus 979 and will post images shortly, great ride
 
Back
Top