Tazio":2uog7qoi said:They both look the same size but it looks like a different thread on the Ti one, and a longer threaded section. Not sure what the thread could be as they are both metric.
Andy R":fa97kci2 said:In that case, what I would suggest is that you run an M10x1.25 tap down the bosses on the fork legs - it seems that for some reason they (and the brake posts) must be slightly undersize. As the pitch looks to be the same however then re-tapping should do the trick.
It's a standard (and common) metric size and any engineering company or car repair place would only take 10 minutes to do it. If you get stuck I've got M10 taps and a wrench that I could lend you, so you could do the job yourself.