Owen Retro Guru Feedback View Oct 25, 2007 #1 Ayup, My frame has a 68mm bottom bracket shell and I have a nice shiny set of Cooks E cranks. What length axle should I use? :roll: Cheers, Owen
Ayup, My frame has a 68mm bottom bracket shell and I have a nice shiny set of Cooks E cranks. What length axle should I use? :roll: Cheers, Owen
tintin40 Retrobike Rider Gold Trader 98+ BoTM Winner Klein Fan Feedback View Oct 25, 2007 #2 Around 120 long up to 127 was the length for my Klein for Cooks cranks
pete_mcc Feature Bike BoTM Triple Crown BoTM Winner Feedback View Oct 26, 2007 #3 Thats for a standard cooks - e-cranks need a 113.5mm on a 68mm shell. Fairly easy to get as shimano make 'em!
Thats for a standard cooks - e-cranks need a 113.5mm on a 68mm shell. Fairly easy to get as shimano make 'em!
pete_mcc Feature Bike BoTM Triple Crown BoTM Winner Feedback View Oct 26, 2007 #4 http://www.bikepro.com/products/bottom_ ... able.shtml http://www.sheldonbrown.com/bbsize.html two really good resources for bottom brackets and compatibility.
http://www.bikepro.com/products/bottom_ ... able.shtml http://www.sheldonbrown.com/bbsize.html two really good resources for bottom brackets and compatibility.
tintin40 Retrobike Rider Gold Trader 98+ BoTM Winner Klein Fan Feedback View Oct 26, 2007 #5 pete_mcc":3un2bsjv said: Thats for a standard cooks - e-cranks need a 113.5mm on a 68mm shell. Fairly easy to get as shimano make 'em! Click to expand... Thanks for the correction pete_mcc
pete_mcc":3un2bsjv said: Thats for a standard cooks - e-cranks need a 113.5mm on a 68mm shell. Fairly easy to get as shimano make 'em! Click to expand... Thanks for the correction pete_mcc
pete_mcc Feature Bike BoTM Triple Crown BoTM Winner Feedback View Oct 26, 2007 #7 tintin40":3omxbsz2 said: Thanks for the correction pete_mcc Click to expand... Only reason I know is I've been fitting an RSR on one bike and an e crank on the other just recently! after going through dozens I found sheldon and the bikepro pages and bingo! If I knew those off by heart then I truely would be sad!
tintin40":3omxbsz2 said: Thanks for the correction pete_mcc Click to expand... Only reason I know is I've been fitting an RSR on one bike and an e crank on the other just recently! after going through dozens I found sheldon and the bikepro pages and bingo! If I knew those off by heart then I truely would be sad!