The one and only "HOW MUCH IS MY xyz WORTH" thread

Status
Not open for further replies.
Hey guys, any downhillers know how much a set of 2005 Manitou Dorado DH would be worth in good condition?

Sorry for the modern content but I am completely in the dark on this one!

Cheers in advance, Luke.
 
Re: Uniglide Sprockets

stefan pethybridge":1od1d0bx said:
What do Uniglide sprockets go for.
Quite a bit less than you're asking!

I'd say £4 for the 16t threaded sprocket, £3.50 for the two big ones, £2.50 for the other plated ones, £2 for the black sprocket, £25 for the lot, plus postage at cost would be reasonable. The 16t threaded sprocket is rare (it's from a juvenile racing block) but demand is likely to be on the thin side for such a big one.
 
Re: Uniglide Sprockets

one-eyed_jim":2hr5b9qu said:
stefan pethybridge":2hr5b9qu said:
What do Uniglide sprockets go for.
Quite a bit less than you're asking!

I'd say £4 for the 16t threaded sprocket, £3.50 for the two big ones, £2.50 for the other plated ones, £2 for the black sprocket, £25 for the lot, plus postage at cost would be reasonable. The 16t threaded sprocket is rare (it's from a juvenile racing block) but demand is likely to be on the thin side for such a big one.

Agree with you.

You can still buy Uniglide Cassettes new for about £25
 
XTR SPDs

XTR SPDs (not retro)

Provided I can unseize them from my cranks, how much could I sell them for? They're in good nick. These are the ones (not a pic of the actual pedals, obviously!):

xtr-spd-mountain-bike-pedals.jpg
 
The time has come to think about splitting my C16-R Singlespeed. Could someone give me an idea of how much I should ask for some of the kit (listed below):

Frame - 19" C16R, professionally converted to singlespeed and resprayed orange by Argos Cycles. VGC
Forks - Orange F7, Mint
Headset - LX, Mint

Stem - Syncros, Mint
Bars - Unbranded Flat, VGC
Grips - Syncros

Brake Cantis - LX (pads are virtually unused), Mint
Brake Levers - Kona Curve, Mint

Seatpost - Orange, VGC
Saddle - Orange "Angry Orange", VGC

Front Wheel - Hope Pro 2 on Mavic X221, Sapim spokes. VGC
Rear Wheel - DMR Revolver on Mavic X221, Sapim spokes. VGC
Tyres - Conti Vapor

Sprocket - 19T (I think, MikeC will correct me if I'm wrong!)
Cranks - Truvativ Stylo
Chainring - Goldtec 32T singlespeed specific
Pedals - XTR SPD (note - these are seized into the cranks)
 
Trek 8000SL

I have a guy making an enquiry into my Trek I just built. He isn't a rider or at all interested in retro stuff.
I've mentioned £250 but I don't want to diddle myself
 
Status
Not open for further replies.
Back
Top