SPECIALIZED GROUND CONTROL
- Thread starter SLIM
- Start date
SLIM
BoTM Winner
the rear end was completely FUBAR , hence the powder coat ..........
started off with a red undercoat , then rubbed it down flush , recoated , then rubbed down again , for a good base layer
then final coat of the "close enough red" gloss , blended in with the original red
came out pretty good , i`d say
started off with a red undercoat , then rubbed it down flush , recoated , then rubbed down again , for a good base layer
then final coat of the "close enough red" gloss , blended in with the original red
came out pretty good , i`d say
