these arrived in the post today 2
- Thread starter marin man
- Start date
justbackdated
Retrobike Rider
- Feedback
- View
A custom 1997 RC36 Pro Class for the new century.
Who noticed the 'radiator' crown and the 'Raceware' Europe [IE not Britain] sales decals?
Approx 60-65mm travel, twin coil sprung and oil[60ml of 5wt] damped. Grease it through the nipples and pop the legs off and clean the seals often to retain the Ti-Ni gold as long as possible.
One from the FEPD workshop methinks
Who noticed the 'radiator' crown and the 'Raceware' Europe [IE not Britain] sales decals?
Approx 60-65mm travel, twin coil sprung and oil[60ml of 5wt] damped. Grease it through the nipples and pop the legs off and clean the seals often to retain the Ti-Ni gold as long as possible.
One from the FEPD workshop methinks
I noticed the radiator style crown,but where were they decaled up for :?:
They seem to have a bit more travel then 65mm,as they are running at 20mm sag and still have plenty left :?
I greased them up yesterday and went for a ride and they work much better than many forks I have owned including some modern ones :shock:
The amount that I use this bike the gold should be there for a very long time indeed
They seem to have a bit more travel then 65mm,as they are running at 20mm sag and still have plenty left :?
I greased them up yesterday and went for a ride and they work much better than many forks I have owned including some modern ones :shock:
The amount that I use this bike the gold should be there for a very long time indeed
justbackdated
Retrobike Rider
- Feedback
- View
Yep-you might be right about the travel-I have never checked it and can't remember what was claimed bitd-although Pace were always a bit 'generous' on their travel claims
