Yo Eddy (Kandy Wild Cherry) - Final Installment - 11th Dec

wadsy

BoTM Winner
Gold Trader
BoTY Winner
98+ BoTM Winner
Kona Fan
Feedback
View
I bought the frame from Al (ti-fat-man) back in April. I couldn't resist the colour :roll: I'm trying to decide whether to try and 'tidy/touch' the frame up a bit or leave it nice and original :? It has original paint and decals so they will stay, just thinking of the odd touch up here and there.

YoEddyFrame003.jpg

YoEddyFrame006.jpg

YoEddyFrame013.jpg


I also bought from him a nice Syncros post and XTR M900 front mech

YoParts014.jpg

YoParts011.jpg


This is my planned spec...

Fork:.................Mag21 SL Ti - lowers sprayed to match frame
Headset:............King - gold
Stem:................Ringle - black
Handlebar:.........Titec Ti
Grips:................Onza (yellow) or Oury light brown to match skinwall
Barends:............Onza - black
Brakes:..............XC-Pro - gold-ish (champagne?)
Brake Pads:........XC - Pro
Brake Cables:.....2mm Shimano - outers black
Canti hangers:....XC-Pro
Brake Levers:.....XC-Pro - gold-ish and black
Shifters:.............XC-Pro
Front Derailleur:..XTR M900
Rear Derailleur:...XTR M900
Derailleur Cables: Shimano - black outers
Cassette:.............XTR M900
Chain:.................KMC 9L - gold
Cranks:..............CBR black, gold rings, purple bolts
Crank Bolts:........Middleburn Ti - gold
Bottom Bracket:..White Phantom Ti
Pedals:...............Onza HO Ti or XC-Pro
Hub Skewers:......Ringle - gold
Rims:
Hubs:..................Nukeproof carbon
Nipples:
Spokes:
Tyres:.................WTB amberwall or Butterscotch Psychos
Saddle:................Flite Ti - black
Seatpost:.............Syncros - black
Seatpost Binder:...Fat - black with purple bolt or gold if I can find one!
Bottle cage:..........Ringle - black or gold!

Most parts have been sourced :D But there's a bit of work to be done :)

The Nukeproof rear wheel needs a new flange machining (in the pipeline)

NPHub.jpg

Flange3.jpg


The Mag 21 SL Ti's need a bit of work, welding and re-threading the boss..

BikeStuff001.jpg


And welding / re-drilling the cable hanger...

MagBrace.jpg


Then they can be prepped for spraying to match the frame.

Bontrager fork crown being prepped...

MagBontyCrown1.jpg


This will have a pace alloy 1" steerer fitted ;)

Parts sourced so far...

Onza bars ends from the US (mfh126) :)

YoParts015.jpg


Grips to be confirmed...

Onza Porci-somethings probably with amberwall tyres

YoParts005.jpg


Or Ourys to match Psychos in butterscotch flavour

YoParts004.jpg


Xc - Pro Thumbies with gold alloy bolts (thanks Probolt ;) )

YoParts010.jpg


Ringle stem - courtesy of Dr S

YoParts002.jpg


Titec Ti bar in rather nice condition from mfh126 over the pond :)

YoParts003.jpg


Chris King 1" No-threadset (ebay US)

YoParts001.jpg


XC - Pro Levers (new) - RB sourced (sorry, forgot who :oops: )

YoParts009.jpg


XC - Pro Canti brakes (new) ebay US (kuladeals) - purple alloys bolts from Probolt

YoParts008.jpg


Tyre choice...

YoParts013.jpg

YoParts012.jpg


Fat 'post clamp with bolt choice...

YoParts018.jpg


And lastly (for now) Ringle 'cage again from mfh126 - Mike's not done too bad out of me ;) :LOL:

YoParts019.jpg


That's all folks - for now ;)


Cheers
wad
 
Great colour, I'd leave it as is.

Nice selection of parts bar the nuke proof hub! Really looking forward to seeing it all come together
 
I think the butterscotch Psychos and matching Oury's will look stellar! Can't wait to see this one built, especially with the matching Mag 21's. :cool:
 
Little bit of progress!

Got the 'car' polishing kit out today and gave the frame a good going over :) Difficult to tell in the pics, but it's made a good improvement, the Kandy Wild Cherry really is a fantastic colour :D

The kit!....

YoBuild-Polish007.jpg


Yes, I did polish and buff it 4 times :shock:

Reduced 'scratches' and much shinier...

YoBuild-Polish001.jpg

YoBuild-Polish005.jpg

YoBuild-Polish003.jpg


With that done, I thought I'd start adding a few parts...

Headset pressed in...

YoBuild-Polish011.jpg


Ringle 'cage and gold alloy bolts...

YoBuild-Polish008.jpg


XC - Pro cantis with purple alloy bolts...

YoBuild-Polish017.jpg


Also put on the front mech and popped in the seatpost/saddle...

YoBuild-Polish018.jpg


I was then summoned in from the 'cave' to make myself presentable for guests :roll: ;) :LOL:

Cheers
wad
 
That's looking fab. The gold headset works perfectly with the 'Fat' lettering and bleeds well with the magenta.
 
Will be watching this as i hope to be in the same position soon with a frame set. :D
 
cchris2lou":1ql6mohw said:
nice , but you cant mix xc pro and M900 . :D

Maybe, but I'm going to ;)

The original plan was to go for XC-Pro as I had the shifters and levers and fancied doing a build with MD kit, but couldn't track down a MD chainset.

Then there were other considerations of hubs and cassettes. The route I've gone down seemed logical (and more 'accessible') :LOL:

I'll see how it turns out, maybe I'll keep looking ;)
 
Super sweet!

My '91 was originally *Kandy Wild Cherry* but after a bad crash I had it repainted black. In the crash I destroyed the Yo Eddy fork, and was set to switch to suspension (Mag 20s!) but noticed that there was a crack at the bottom of the head tube. We told Fat and no questions asked they offered to reweld the area and repaint free, return postage also included.

The thing was, I was told kandy colors (happy to see a bit of the gold fleck in your pics!) would be an upcharge. I should have had them repaint it in KWC, but I was poor and trying to save up $$ for the shocks and new stem/headset. So it went black........ I'd love to get it redone in the original colors.....

Sweet bike!
 
Back
Top