Pace RC30 forks. black, 1 1/8th threaded steerer. OK condition, crown is good, but legs really need a re-spray
Syncros Stem: 1 1/8th quil stem, black 130mm. Can't remember the rise - looks about a 5 degree ? Has a Titanium bolt in the quil part. and pipe for front brake cable feed. Average condition
Deore XT Cartridge brake shoe block set (part 83X 9802) to fit M737 Low profile cantilvers. In box, never fitted.
Syncros 26.8mm dia, black, 330mm aluminium seat post - it's got a very slight bend in it halfway down. Might be useful to strip for a spare clamp assembly?
XT integrated STI shifter/brake levers (for Cantilevers not V's). 8 speed with the window on top. Probably about '95. Right hand one (rear) is in good condition as minimal use. Left one works fine but window is missing from top - might suit a DH bike with a single front ring ? (I remember some people cutting the shifter bracket off the front one bitd.)
7 speed 12-28 XTR cassette (13T cog is missing) average condition - fairly minimal use. This seemed to be a trend at the time when only XTR was 8 speed and taking out the 13T cog made for a lighter cassette than the 7 speed XT version. (see, i was there, i know the tricks....)
Blue Ringle bottle cage - condition poor, mounting washers and bottle stop missing. Postage only
Nuke Proof 32hole front hub, condition average (for a 11 year old part) bearings run smooth, only used in dry conditions. Might keep this as looks cool and has some sentimental value.
Nothing too exciting but you never know what folks are after......
Jon
Syncros Stem: 1 1/8th quil stem, black 130mm. Can't remember the rise - looks about a 5 degree ? Has a Titanium bolt in the quil part. and pipe for front brake cable feed. Average condition
Deore XT Cartridge brake shoe block set (part 83X 9802) to fit M737 Low profile cantilvers. In box, never fitted.
Syncros 26.8mm dia, black, 330mm aluminium seat post - it's got a very slight bend in it halfway down. Might be useful to strip for a spare clamp assembly?
XT integrated STI shifter/brake levers (for Cantilevers not V's). 8 speed with the window on top. Probably about '95. Right hand one (rear) is in good condition as minimal use. Left one works fine but window is missing from top - might suit a DH bike with a single front ring ? (I remember some people cutting the shifter bracket off the front one bitd.)
7 speed 12-28 XTR cassette (13T cog is missing) average condition - fairly minimal use. This seemed to be a trend at the time when only XTR was 8 speed and taking out the 13T cog made for a lighter cassette than the 7 speed XT version. (see, i was there, i know the tricks....)
Blue Ringle bottle cage - condition poor, mounting washers and bottle stop missing. Postage only
Nuke Proof 32hole front hub, condition average (for a 11 year old part) bearings run smooth, only used in dry conditions. Might keep this as looks cool and has some sentimental value.
Nothing too exciting but you never know what folks are after......
Jon
