holdsworth bottom bracket

hurin76

Retrobike Rider
I removed my bottom bracket as the sr chainset I acquired was fouling the frame. the bb that was in there was a 68/ 122. this seems to be the largest square taper bb that shimano do. i need another 2mm to clear the frame...

has anyone got any solutions? or perhaps I have done something wrong that you can answer....please help!!
 
hurin76":18xgw2gv said:
I removed my bottom bracket as the sr chainset I acquired was fouling the frame. the bb that was in there was a 68/ 122. this seems to be the largest square taper bb that shimano do. i need another 2mm to clear the frame...
Shimano still make a 127mm UN54:

http://www.wiggle.co.uk/p/cycle/7/Shima ... 360027179/

but you might get away with a 2mm spacer under the fixed cup. Sturmey Archer hub spacers work well for this if you don't have something made for the job.
 

Latest posts

Back
Top