'97 King Kahuna - Updated 13th October

Interim update....

Right, been spending (what's left of) the savings and aquiring a few parts.

Looking at a retro style, but with as lightweight parts as I could afford Main objective was to get the 'look' as I wanted and I think the parts I've gone for are an improvement over the original build.



King Sotto Voce headset
Syntace F99 stem
Gripshift X-rays, thought I'd give them a go, look tidy and are lightweight, XTR M951's in reserve if I don't like them
Fox Float RLC 100 @ 100mm travel at the mo, will be dropped to 80mm - Suit the frame better than the RC36's IMO.
USE seatpost in black
Conti Speed King Supersonics in 2.3, off my Superlight and cleaned
Raceface Deus Chainset and BB - won't be staying, going for RS8 Duo Isis - black rings and silver arms.
Oh and the gorgeous King wheelset

Waiting on USE Atom carbon riser, then I'll get the cables and chain on etc











Opinions always welcome


Cheers
wad

The bike looks great

One thing though - Chris King hubs don't take kindly to being built up radially. In fact the company themselves advise against it.

Amazing build, I think the modern parts look really good on the Frame, especially the forks

I'd be leaving Syncros parts on it, that stuff always goes well with Konas, especially trick titanium ones

Thanks for that,

The wheel was built that way when I bought it. Would you suggest it needs re-building then?

Cheers

Thanks for the +ive comments

The Syncros won't be going back on I'm afraid; the stem was one of the things I specifically wanted to change

Cheers

After about 4 weeks my cable cutters arrived so I could finish this stage of assembly. The cutters do seem to crack the XTR gear cable outers is this normal??

Still not finished and the items to be changed are listed in the spec below.

Spec to-date:

Frame: 97 Kona King Kahuna Hei Hei 19"

Fork: Fox Float 100 RLC - to be modded to 80mm travel

Headset: Chris King Sotto Voce
Stem: Syntace F99 with Ti bolts
Handlebar: USE Carbon Atom Riser!
Grips: Gripshift clear

Brakes: XTR M951 V's - waiting for Vuelta magnesium to replace
Brake Pads: XTR
Brake Cables: XTR
Brake Levers: XTR M951

Shifters: Gripshift 800 X-ray
Front Derailleur: XTR M952
Rear Derailleur: XTR M952
Derailleur Cables: XTR
Cassette: XTR M950 8spd Ti
Chain: KMC X8 - 92
Cranks: Raceface Dues - to be replaced with Middleburn RS8 Duo
Crank Bolts: Raceface
Chainrings: Raceface 42,32,22
Bottom Bracket: Raceface - To be replaced with Isis, probably American Classic
Pedals: Onza HO Titanium - to be replaced with Eggbeater 2ti

Hub Skewers: Hadley Racing Titanium
Rims: Mavic 217 SUP
Hubs: Chris King
Nipples: Brass
Spokes: DB Stainless
Tyres: Conti Speed King Supersonic 2.3
Tubes: Bontrager SL

Saddle: Flite Titanium
Seatpost: USE
Seatpost Binder: Kona

Weighs it at approx 9.5kg or I should say just under 21lbs

Pics....







I'm feeling much happier with it now and once the parts above are changed and the forks dropped....

Cheers
wad

bravo, its looking really clean!

i cant wait to see it in finished spec.

Prefer the Pace forks on it, are these now or sale?

Each to their own

No, not for sale, back on my '97 Explosif.

Cheers

Cheers

Just a few more parts to aquire