Headset question
- Thread starter plexus
- Start date
B3
Senior Retro Guru
No, i would have thought that it's an 1 1/4", shimmed to 1 1/8" when 1 1/4" became hard to find.
Do you have verniers? Can you measure the outside diameter of the head tube on the frame?
Wall thickness is going to be around 2mm, so subtract 4mm from this measurement.
If you have a spare 1 1/8" head set see how far off the cup size you are.
Do you have verniers? Can you measure the outside diameter of the head tube on the frame?
Wall thickness is going to be around 2mm, so subtract 4mm from this measurement.
If you have a spare 1 1/8" head set see how far off the cup size you are.
Did some lightspeed frames not come with an alloy insert at the headtube?
I remember them having an alloy seatpost insert to prevent galling - I wonder if this was another of those short lived great ideas at the time?
Interesting... and we need more pictures
I remember them having an alloy seatpost insert to prevent galling - I wonder if this was another of those short lived great ideas at the time?
Interesting... and we need more pictures
