Steerer Tube Swap Shop - shorter for longer! NO SALES!

Hi Guys

I am now desperate for a 1' steerer for my Judy SL. They currently have a nice clean 1 1/8 that i can swap with someone. Please help though as this is all i need to finally finish my girlfriends bike.
 
Be a sport!

For karma swapsies only:

1. Kona P2s in pale metallic blue - 1 1/8th inch threaded 163mm (32mm thread) or 6 1/2" (1 1/4" thread).

Swap longer P2 200mm + (8") in either ahead or threaded - I pay postage both ways.

2. Judy bolted steerer and tube - 1" threaded 230mm (51mm thread) or 9" (2" thread).

Swap similar length combination in either ahead or threaded - I pay postage both ways.

Both items in excellent condition - expect same unless by negotiation!

Mr K
 

Attachments

  • P2 Judy.jpg
    P2 Judy.jpg
    40.4 KB · Views: 10,282
I have 183mm threaded P2`s tripple butted, and 203 threaded P2`s triple butted.

Before I cut one of them down and get it rethreaded, does anyone have any 163mm triple butted, any condition i`m not fussy as i`m repainting it. Must be 390mm axle to crown.
 
I'm after a 1 1/8th" steerer/crown assembly for Magura Asgard forks (or the Rond O24U or 2-stroke, they share the same crown)- the steerer needs to be at least 180mm. This is obviously the bolted crown, not the bonded version.
I have one that is 160mm long, which is fine for short 90mm headtubes (like 17" RM Blizzards etc).

Anything out there ?
 
AMP forks/1" steerer

Greetings,

Anyone got some 1" Amp forks/steerer etc that they want to swap for a 200mm+ 1/18" steerer?

Thanks
 
I need 2 old Marzocchi steerer tubes. one 1inch and a 1 1/8 if the were threadless that would be great but let me know what you have.
 
Manitou 2 crown & steerer 1x8 threaded. There's some headset pars as well (only missing bottom outer race).

Seems the Manitou 2, 3, and 4 have identical and interchangeable crowns.

Supra would gladly swap for a 1 1/8" steerer/crown assembly from any of the Manitous.
 
i have a massive full length uncut 97 judy DH crown and steerer 1 1/8 ahead, looking for a shorter one.

mine is mint and im looking for similar, not at all insterested in scratched and bashed examples or anything that has been 'cleaned up' / polished.


i will get dimensions later , but my new head tube is 110mm
 
Have a 230 mm Judy bolted crown 1 1/8 ahead, good condition some signs of use.
Also have a NOS 1" uncut aheadcrown for Judy's, only some light signs of storage.

Looking for Mag21 or Judy crown, 210+ mm 1" treaded or P2/Spinner rigid.

Who can help me with this?

Cheers,
Martin
 
Back
Top