1960 Peugeot PX10.

Yeah reckon there will be Scooter...any excuse to get out of tiling the bathroom or repainting the bedroom an awful shade of pink. :LOL: Time to finish the man cave, I'm thinking of knocking a hatch through to the kitchen so meals and beverages can be delivered on demand.... isolated with my retro bikes...superb. ;) Got plenty of builds to get on with which I'll have to try and fit in around my grueling training schedule. :LOL:
 
The frame has cleaned up really well after a thorough degrease, then polished with Mer. The chrome on the forks and rear triangle is virtually unblemished and the paint around the bottom bracket looks fresh. Top tube has some marking and has had some kind of bag or satchel hanging from it. Over time the bottom corners have rubbed through the paint on seat and down tube. Still got bars, stem and brake levers to polish and saving the worst job till last... polishing up the wheels :facepalm:
 

Attachments

  • 20200325_180104.jpg
    20200325_180104.jpg
    831.6 KB · Views: 767
  • rps20200401_234230_871.jpg
    rps20200401_234230_871.jpg
    124.3 KB · Views: 762
  • rps20200401_234305_882.jpg
    rps20200401_234305_882.jpg
    63.4 KB · Views: 762
  • rps20200401_234355_238.jpg
    rps20200401_234355_238.jpg
    80.1 KB · Views: 762
  • rps20200401_234503_185.jpg
    rps20200401_234503_185.jpg
    89.2 KB · Views: 764
  • rps20200401_234538_608.jpg
    rps20200401_234538_608.jpg
    87.8 KB · Views: 767
  • rps20200401_234632.jpg
    rps20200401_234632.jpg
    122 KB · Views: 769
  • rps20200401_234851_214.jpg
    rps20200401_234851_214.jpg
    113 KB · Views: 769
A few more pictures...
 

Attachments

  • 20200325_180117.jpg
    20200325_180117.jpg
    828 KB · Views: 729
  • 20200325_180231.jpg
    20200325_180231.jpg
    788.1 KB · Views: 730
  • 20200325_180333.jpg
    20200325_180333.jpg
    528 KB · Views: 730
  • rps20200402_215645_717.jpg
    rps20200402_215645_717.jpg
    115 KB · Views: 730
  • rps20200402_215752.jpg
    rps20200402_215752.jpg
    59 KB · Views: 731
  • rps20200402_220139_363.jpg
    rps20200402_220139_363.jpg
    112.1 KB · Views: 731
  • rps20200402_221138_993.jpg
    rps20200402_221138_993.jpg
    191.1 KB · Views: 728
  • rps20200402_221451_889.jpg
    rps20200402_221451_889.jpg
    80.4 KB · Views: 726
The IGOL pin-up girl decal dates from the 50/60's and was probably put on by the original owner, possibly working in automotive engineering environment judging by the amount of thick grime coating the PX. IGOL is a French lubricant manufacturer and used different pin-up girls in their advertising... nice to glance down while shifting and see a pretty girl between your legs. ;)
Cheers for your encouraging comments guys. :D

https://www.igol.com/en/decade/2010-2019/
 

Attachments

  • 20200325_180124.jpg
    20200325_180124.jpg
    575.9 KB · Views: 672
  • rps20200406_030235_582.jpg
    rps20200406_030235_582.jpg
    161 KB · Views: 670
  • rps20200406_030519_659.jpg
    rps20200406_030519_659.jpg
    180 KB · Views: 672
Re:

Polished up the bars, stem and seat-pin the weekend using fine grit sandpaper on the deeper scratches first to get the worst out. Then onto 600 grade wet & dry paper followed by 1200 grade with plenty of water, finished off with a buff with Solvo. Some of the deep scuffs still show and the finish is more bright satin which is probably nearer to original rather than mirror finish. The seat- pin is really short and light but no markings, so not sure what make.
 

Attachments

  • rps20200406_035119_603.jpg
    rps20200406_035119_603.jpg
    287.7 KB · Views: 663
  • rps20200406_035305_481.jpg
    rps20200406_035305_481.jpg
    135.6 KB · Views: 662
  • rps20200406_035353.jpg
    rps20200406_035353.jpg
    192.2 KB · Views: 661
  • rps20200406_035529.jpg
    rps20200406_035529.jpg
    182.1 KB · Views: 660
  • rps20200410_065650_635.jpg
    rps20200410_065650_635.jpg
    74.5 KB · Views: 483
  • rps20200410_065733_914.jpg
    rps20200410_065733_914.jpg
    149.2 KB · Views: 484
  • rps20200410_065808_292.jpg
    rps20200410_065808_292.jpg
    113.7 KB · Views: 486
Bars are AVA Criterium, nice and skinny measuring 37cm C-C at the front of the bends.
 

Attachments

  • rps20200410_024928.jpg
    rps20200410_024928.jpg
    259.2 KB · Views: 496
  • rps20200410_024957.jpg
    rps20200410_024957.jpg
    93.4 KB · Views: 493
  • rps20200410_025039_880.jpg
    rps20200410_025039_880.jpg
    220.1 KB · Views: 494
  • rps20200410_025108_295.jpg
    rps20200410_025108_295.jpg
    221.3 KB · Views: 494
  • rps20200410_031304_943.jpg
    rps20200410_031304_943.jpg
    104.6 KB · Views: 493
Midlife":1wb3b147 said:
While I'm in retro memory mode, don't forget to check the stem for cracks where the slots have been cut for expansion.
Stem is by AVA with 80mm reach...had a close inspection for any cracking and all seems well.. thanks for the heads-up Shaun. :D
 

Attachments

  • rps20200410_030122.jpg
    rps20200410_030122.jpg
    189 KB · Views: 493
  • rps20200410_030214_638.jpg
    rps20200410_030214_638.jpg
    281.3 KB · Views: 492
  • rps20200410_030248.jpg
    rps20200410_030248.jpg
    157.8 KB · Views: 493
  • rps20200410_030324_541.jpg
    rps20200410_030324_541.jpg
    160.5 KB · Views: 493
  • rps20200410_030402_779.jpg
    rps20200410_030402_779.jpg
    193.1 KB · Views: 493
  • rps20200410_030443.jpg
    rps20200410_030443.jpg
    201.8 KB · Views: 491
  • rps20200410_030525_794.jpg
    rps20200410_030525_794.jpg
    282.8 KB · Views: 492
  • rps20200410_030603_843.jpg
    rps20200410_030603_843.jpg
    194.9 KB · Views: 493
Back
Top