Steerer Tube Swap Shop - shorter for longer! NO SALES!

I have a threaded 145mm 1 1/8” rockshox Mag 21 crown & steerer (I am told will fit Quadra range also).

Looking for threaded 165mm 1 1/4” rockshox Mag 21 (or compatible) crown & steerer
 
I'm looking for a 1-1/8 threadless Bomber Z2 steerer, at least 210 mm long, not including the bit of steerer that goes inside the crown. I have a steel 1-1/8 steel threadless steerer I could swap, which is 193 mm long (not including the length inserted into the crown).
 
Hi,

Will swap my 1-1/8 threaded and 14 cms long RS1 steerer tube, for the same specs but 1" steerer (if you have one and want to sell it, will also be OK for me).

:)
 
Re:

I have a mint Manitou Three 4-bolt steerer that's about 8 inches. Need to trade for the same in about 9.5 inches. 1 1/8 threadless.
 
WTT threaded 200mm 1 1/8" Rock Shox Mag 21 crown for threadless

Come from 1994 model.
I think steerer is aluminium. Threaded part is 25mm long.
I'm looking for the same spec'd crown (so still 1 1/8" and 200mm long), but threadless.
Thanks.
 
Hi all,

I am looking for a 1" Pace RC35 MXCD threadless steerer min 200mm

I have a 1" @ 180mm and 1 1/8" @175mm threadless, to swap....

Will buy if not needing / wanting a swap... PM me...
 
Re: WTT threaded 200mm 1 1/8" Rock Shox Mag 21 crown for threadless

foxb13":1oxzd6oi said:
Come from 1994 model.
I think steerer is aluminium. Threaded part is 25mm long.
I'm looking for the same spec'd crown (so still 1 1/8" and 200mm long), but threadless.
Thanks.

Project has evolved. I'm still willing to swap my threaded 200mm 1 1/8" Rock Shox Mag 21, but I'm now looking for a threaded 170mm 1 1/8" one to replace it.

Thanks for looking!
 
Re:

I'll have a look once I find them.
Threaded didn't come in Aluminium though, so yours will be steel unless somebody tried to put threads in a threadless SL on.
Any pictures.
 
Looking for a 1993 1" Mag 21 Crown and steerer. Threaded (160mm )

I have to swap:

- RS Judy XC : 1' 136mm (26mm threaded)
- Marzocchi xc700 steerer : 1 inch 230mm (200mm effective)
 
Back
Top