Hope rear hub spares

Re:

Maybe someone can share what the drive side end cap looks like that I need then? Ian might have one, Dyna looks like he may have one in every colour!

Thanks :)
 
Looks like this -


JE James claim to have them in stock and possibly do. But my experience of them is they dont update their site, and will tell you anything.
https://www.jejamescycles.com/hope-xc-m ... gKW4_D_BwE

If they have it great, otherwise pm me.
Will say these to me are harder to find. You can make do with one off a front xc, but its a little long really.


As you see ive plenty of freehubs ;)
 

Attachments

  • hope-mono-xc-bulb-rear-drive-side-spacer-.jpg
    hope-mono-xc-bulb-rear-drive-side-spacer-.jpg
    10.1 KB · Views: 403
Re:

Dyna please let me know what you would like for a freehub and end cap.

Ian if you could also let me know if you have an end cap like the one above too.

If either of you can match the blue in my photos then all the better.
 
To my knowledge all drive side end spacers were silver, or silver latterly. I'd one done red for a red set of wheels but thats the only ive seen :?
 
Re:

Here's one I found in my spares box. Is it the right one?
 

Attachments

  • 2018-02-20 23.58.47.jpg
    2018-02-20 23.58.47.jpg
    28.1 KB · Views: 394
The left side is a front non disc side, the other looks to be a drive side rear.

How thick is it and ill compare.
 
Re:

Ok, measurements are:

Widest part/bottom 28mm approx
Knurled part: 18mm approx
Height measured from base to top: 10mm approx.

Roughly measured with a tape measure as I've no verniers that work.
 
Back
Top