This mornings pick up at car boot

Re:

Small update:
After going through everything on it the only thing wrong is a little play in bb and a puncture in front wheel.
It has a mixture of shimano running gear with a dia compe canti brake system. Looks like the dia compe brake blocks are original also.
It did clean up ok but has quite a lot of rub marks in the lacquer which really spoils it so I gave it a good soak in silicone spray to make it gleam so the mountie(Steve) can sort some pics out for the thread later on.
To remove the silicone it will get a few kettles of near boiling water then I can t. Cut and wax for the final finish
 
Re:

26230455_10155702633578429_8544867265872258195_n.jpg


26733492_10155702633503429_9018259690030144882_n.jpg


26238790_10155702633373429_831721753148695708_n.jpg


26805068_10155702633323429_6302859728909115744_n.jpg


26231747_10155702633133429_3378771199168830521_n.jpg


26815284_10155702633078429_7344352289044512685_n.jpg


26220024_10155702633018429_5923137767434816209_n.jpg


26229961_10155702632933429_3571596179837190208_n.jpg


26804763_10155702632853429_5945172981450327519_n.jpg
[/img]
 
Re:

£30 and ready to ride bar a bit of elbow grease :cool: Great condition too.
M550 drivetrain was underated IMO. The rims were made by Sun but it looks as if the logo has faded from the circle to the left of 'Levanter'. Brilliant - enjoy it :D
 
Re:

That's ace.

The DX thumbies are worth the price paid on their own.

It's interesting, DB must have been early adopters of top routed front mech cables as they had to use a top pull DX front mech on their LX builds cos there wasn't one in the LX groupset.

My Response is an almost identical spec, but with X-1 brakes.
 
Back
Top