How do I change bearings on a Hope hub?
- Thread starter orange71
- Start date
cdaimers
Devout Dirtbag
I think you can download the instructions from hope web site. I have similar hubs and used large hammer/screwdriver technique after removing the axles via the approved hope methods.
I also believe that you can get FAG bearings to fit, just take them along to your local bearing specialist.
I also believe that you can get FAG bearings to fit, just take them along to your local bearing specialist.
cdaimers
Devout Dirtbag
The instructions for the rear are at :
http://www.hopetech.com/database/Rear_Cassette_hub_inst.PDF
If you follow the instructions for bearing removal then you wont go wrong.
I have done a few now and they are pretty easy, although they are tight. Just baist everything in WD40 a day before you try, the bearings should drive out OK.
http://www.hopetech.com/database/Rear_Cassette_hub_inst.PDF
If you follow the instructions for bearing removal then you wont go wrong.
I have done a few now and they are pretty easy, although they are tight. Just baist everything in WD40 a day before you try, the bearings should drive out OK.
Similar threads
