Hi & RC35 help please
- Thread starter mik0312
- Start date
SLIM....exactly the same as these. Those are 1994 RC35 AB refers to atmosphere balance A disc that went between the two elastomers with a horizontal hole to allow the fork to breath via the central rod/ retaining screw each leg had one. You should have two elastomers 50/55mm long in each leg with the disc in between and a small 13x20mm elastomer under the head of the rod/screw for rebound control. In late 1995 the RC 35 monobox was introduced they do not use elastomers they use what PACE called MCU's similar to MANITOUS in size and a very different leg assembly to the original RC35........hope this helps
SLIM
BoTM Winner
just realised whats wrong :roll:
not having the manual to work from , in my normal reverse engineering way
its the top out elastomer , should be over the stantion not beneath it
makes sense if you`ve seen one i suppose
mik0312 , tried e mail pace and no reply ?
need a rocker for the brake assy , got a similar one in a nice red anodizing though
and also need a set of top and bottom caps , any idea on price
not having the manual to work from , in my normal reverse engineering way
its the top out elastomer , should be over the stantion not beneath it
makes sense if you`ve seen one i suppose
mik0312 , tried e mail pace and no reply ?
need a rocker for the brake assy , got a similar one in a nice red anodizing though
and also need a set of top and bottom caps , any idea on price
SLIM
BoTM Winner
retroking , yep exactly
they do have the small disc with the hole as described
defo has the two elastomers , but.... it did have a third which turned to powder
as well as the smaller top out / rebound elastomer
MCU and elastomers are the same thing , just an " upgrade " 95 style
give it a new name and its an " upgrade "
they do have the small disc with the hole as described
defo has the two elastomers , but.... it did have a third which turned to powder
as well as the smaller top out / rebound elastomer
MCU and elastomers are the same thing , just an " upgrade " 95 style
give it a new name and its an " upgrade "
SLIM whats the screw/rod made from the original was some type of Alloy To get more travel someone may have made a longer screw/rod and added half a elastomer On the original set up when assembled you should have from top of leg under crown to top of outer leg seal 50/55mm
mik0312
Dirt Disciple
SLIM":52gx4zk7 said:
SLIM is this the address you E-Mailed?
pace@pace-racing.co.uk
They are usualy very fast :shock:
No idea on pricing though for your bits - but PACE do tend to be at the top end of your expectations
