1992 Klein Adroit Backfire UltraLight replica

Re: 1992 Klein Adroit Backfire

Careful with the sanding. Double check the spacing from cog to cog, should be around 3.5mm I think, if any are much bigger focus your efforts there.
 
Re: 1992 Klein Adroit Backfire

mkozaczek":1o6vd6so said:
Careful with the sanding. Double check the spacing from cog to cog, should be around 3.5mm I think, if any are much bigger focus your efforts there.

Thanks Martin!
 
Re: 1992 Klein Adroit Backfire

Just measured my other freewheel, and that's around 32.5mm thick, this one is around 36mm.....so, or just put the other on the bike or start sanding ;)
 
Re: 1992 Klein Adroit Backfire

tigern":1l9i2tm8 said:
the rear rim is on it's way from Italy....
....


Is this rim from me? WOW didn't get it :cool:

difficult to find the hie hubs? I got an originally xc-pro based but no hi-e hubs :roll: :cry: don't know what hubs to use as I have already campy rims....
 
Re: 1992 Klein Adroit Backfire

Hi! Yes, I think this was yours!

Not that easy to find the right front hub, seen a few but with too many holes or a 28H but only in a smaller version....

But the search goes on ;)
 
Re: 1992 Klein Adroit Backfire

tigern":3qeuutj2 said:
Hi! Yes, I think this was yours!

Not that easy to find the right front hub, seen a few but with too many holes or a 28H but only in a smaller version....

But the search goes on ;)


My compliments for the love you give to this bike, gorgeous!
 
Re: 1992 Klein Adroit Backfire

Yip :D

It's a bit heavier than the Coda hub which temporarily replaced it...

It's around 130 grams, lacing it at the moment, hubs, nipples, spokes and rims are 630 grams, used to be 600....

so now, who got those Contax rims???

Total weight of the bike is now 8.87 KG.
 

Attachments

  • BF130214.jpg
    BF130214.jpg
    71.8 KB · Views: 640
  • BF130214-01.jpg
    BF130214-01.jpg
    70.7 KB · Views: 640
Back
Top