Clearout - NRS frame, Reba SL's, cranks, wheels, brakes, etc

Hallsy

Devout Dirtbag
Having a bit of a clearout and have the following bits for sale.

Most of these bits were fitted to my gf's bike, a Giant NRS I built up for her, but lack of space & use means I'm having a clearout!

FSA 'Pig' 1 1/8" Ball Bearing Headset - brand new, never used - £17.50 posted

2003 Giant NRS 3 Frame size S (approx 16.5" from centre of BB to top of seatube, 14.5" from centre of BB to centre of TT) - Silver, generally good condition but does have some cable rub and marks in places. All bearings in good condition, rear bushes have been upgraded to BETD bearing kit so all pivots run bearings, rocker plate bearings are new. Shock has just had the seals and oil replaced. Frame comes with a brand new mech hanger, FSA integrated headset (cleaned & regreased), Identiti seat clamp, Giant seat post & Shimano front mech - £130 posted

2005 RockShox Reba SL forks, 100mm with approx 185mm steerer (previous owner did not cut this perfectly square, can square it up if required, but will mean steerer will lose a couple of mm). Standard 26" QR fitment. Matt black lowers with gold stanchions. Good condition, some cosmetic marks to lowers but generally look very good. No leaks, lockout works fine, rebound adjuster can fall out if you don't remember to make sure it's clicked in after adjusting - £90 posted SOLD

Pair of 26" DT Swiss XR4.2D rims laced to XT hubs, some minor marks, hubs run smoothly, XT skewers included - note tyres are NOT included - £70 SOLD

Shimano Deore M590 Hollowtech chainset 175mm - heel rub to arms, chainrings have plenty of life left. I will also include the BB, which I have converted to 7mm bearings as the old Shimano specific 6mm bearings died pretty quickly. - £30 posted

Avid Juicy 3 brakes - these need bleeding. Pistons are free, brake pads look as new, come with standard adaptor for rear and 203mm adaptor for front. One of the bar clamp bolts has been replaced. - £30 SOLD

Avid 160mm rotor - as new - £10 posted

Tektro 180mm rotor - as new - £5 posted

Shimano RD-M761 XT rear mech - good condition, just a bit grubby - £20 posted

Ritchey Comp seat post - 400mm 30.9mm very good condition - £7.50 posted

Gusset Slim Jim pedals - white, some marks and dirt from use, bearings run smooth - £7.50 posted

Shimano HG70 9 speed cassette - 11t - 32t, good used condition - £10 SOLD

Answer Pro Taper riser bars - gold, 2" rise, standard clamp - quite faded but good mechanically - £7.50 posted


IMG_1859 by Hallsy01, on Flickr


IMG_1850 by Hallsy01, on Flickr


IMG_1786 by Hallsy01, on Flickr


IMG_1784 by Hallsy01, on Flickr


IMG_1783 by Hallsy01, on Flickr


IMG_1801 by Hallsy01, on Flickr


IMG_1802 by Hallsy01, on Flickr

For any more info, please contact here or at h4llsyATgmailDOTcom

I prefer payment via bank transfer or paypal gift. Thanks :)
 
Re: Clearout - NRS frame, Reba SL's, cranks, wheels, brakes,

Can I dibs the brakes please for Liam1611 if he doesn't need em I may be keen myself. Thsnks
 
Re: Clearout - NRS frame, Reba SL's, cranks, wheels, brakes,

No problem - consider them dibbed!
 
Re: Clearout - NRS frame, Reba SL's, cranks, wheels, brakes,

Sorry, I don't. I'd imagine you could replacements easilly enough though.
 
Re: Clearout - NRS frame, Reba SL's, cranks, wheels, brakes,

I'll take the forks if the other lad doesn't want them.
 
Re: Clearout - NRS frame, Reba SL's, cranks, wheels, brakes,

Ok, I'll PM Mark to give him first refusal as he did enquire first. I'll get back to you asap.
 
Re: Clearout - NRS frame, Reba SL's, cranks, wheels, brakes,

Could i have pictures of the frame please

Thanks

Simon
 
Back
Top