Leightweight 1 1/8" stem?

marshole82

Old School Hero
Feedback
View
I've been a bit of a plum and bought a new bar with a 25.4 clamp and a stem with a 31.8 clamp. I know, idiot. Stem is a white easton ea90 100mm 0degree, bar is 560mm easton ea50 3degree sweep. Weigh 280g together!

So I have 3 options:

Does someone have a flat bar weighing at 150g or less for 31.8 clamp?

Does anyone have a 100mm+ stem weighing in under 130g with 25.4 clamp (preferably a 4bolt plate)?

Does anyone have a shim to fit 25.4 bar to a 31.8 stem?

Reply with what you've got and we'll see where we go!

Oli
 
I have a Syntace F99 stem, 120mm 6 deg , weighing in at 104g. I'm after £25 for it .
Can do pics in the morning.
 
If you have time and choose the correct size USE shim, you can cut them down to suit. The middle one is a converted post shim :



To fit this :



WD :D
 
WD Pro":1kur39w4 said:
If you have time and choose the correct size USE shim, you can cut them down to suit. The middle one is a converted post shim :



To fit this :



WD :D

That's a whole other story, I need a post shim too lol
 
Reluctant":2i9bqq3o said:
Race Face Evolve, 100mm/5 or 6 degree rise, in spotless condition........weighs 148g. £12 posted.

hi, one for me to think about as it weighs a little more than my current. although if i added a shim it would no doubt weight more than your offering. i think i can get a bar weighing less than 150g to fit an oversized stem though.

cheers for the offer though :)
 

Latest posts

Back
Top