B bhill22 Retrobike Rider Feedback View Oct 16, 2013 #1 for rc35 or36, ahead, if you want a swop have plenty 1 1/8
welly Retro Guru Feedback View Oct 16, 2013 #2 I have a 1 inch threadless that I would happily swap for a long 1 and 1/8 th threadless?
B bhill22 Retrobike Rider Feedback View Oct 17, 2013 #3 Hi Need 200mm above the crown, and also the collar at the bottom as it will match up with steerer thx
Hi Need 200mm above the crown, and also the collar at the bottom as it will match up with steerer thx
welly Retro Guru Feedback View Oct 17, 2013 #4 Just measured mine and it is 210 from top of crown and I have the adapter to pack out to 1 and 1!8th.
Just measured mine and it is 210 from top of crown and I have the adapter to pack out to 1 and 1!8th.
B bhill22 Retrobike Rider Feedback View Oct 17, 2013 #5 230mm overall, 200 from crown Attachments P1040269.JPG 64.7 KB · Views: 190
welly Retro Guru Feedback View Oct 20, 2013 #6 bhill22":kyu2cqhs said: 230mm overall, 200 from crown Click to expand... Looking at it, it may be a little short, don't have any spacers to play with and is on the limit at 210mm above crown.
bhill22":kyu2cqhs said: 230mm overall, 200 from crown Click to expand... Looking at it, it may be a little short, don't have any spacers to play with and is on the limit at 210mm above crown.
