RaceFace Turbine cranks - inner chainring bolts & spacer
- Thread starter tomwood1981
- Start date
HI All - I have a CNC Race face 5 bolt crank set exactly as the one pictured above. Believed to be model year 1997 / 1998/ Etched on drive crank is no. P2693
I was able to install the outer / Mid chainrings, but missing the bolts / spacers for the inner, which are way longer and I am not sure of the exact Race Face required size to place the Middleburn 22T inner granny.
Could you confirm which are the correct sizes for the innerbolts & spacers - I am upgrading my retro GT Zaskar for next week ends' Scwhalbe MTB Marathon in Ruthi and want to be all ashiny - Any help very gratefully received
I am also looking for the same in polished or silver CNS if any of you has one for sale please do let me know
GG / GTItalia
I was able to install the outer / Mid chainrings, but missing the bolts / spacers for the inner, which are way longer and I am not sure of the exact Race Face required size to place the Middleburn 22T inner granny.
Could you confirm which are the correct sizes for the innerbolts & spacers - I am upgrading my retro GT Zaskar for next week ends' Scwhalbe MTB Marathon in Ruthi and want to be all ashiny - Any help very gratefully received
I am also looking for the same in polished or silver CNS if any of you has one for sale please do let me know
GG / GTItalia
marky mark
Senior Retro Guru
- Feedback
- View
8.3 mm seems to be the size .. with 17mm bolts, a picture of the spider from the back side woudl confirm this.
let me know if you need some spacers,,
mark
see link
viewtopic.php?t=84403
let me know if you need some spacers,,
mark
see link
viewtopic.php?t=84403
marky mark
Senior Retro Guru
- Feedback
- View
did you get them ok ?
mark
mark
Similar threads
