Steerer Tube Swap Shop - shorter for longer! NO SALES!

M-Power":m3ijjebw said:
Potentially looking for a threaded 165-170mm + 1 1/8th Manitou 3 fork threaded steerer.

PM me if you can help.

Will
Think I'll have something that might fit, I'm due a mani 2 fork with allegedly 165-170 inch eight steerer probably second week sept.

I'm after an inch quarter steerer crown or, if not a longer ahead inch eight steerer.
 
Hi all ! I have a RS Mag 21 steerer tube, 17 cm long, 1 1/8th threadless, but it is too short, I need one 19 cm or more. Thanks !

FOUND Thanks !
 
Hi,

I have a Marzocchi crown with cryo fitted (not bolt on) 1 inch steerer 171mm long unthreaded.
I'm looking for a Marzocchi crown with either an uncut 1 inch steerer 260mm + or just the crown, I have a steerer that I can fit to it.
I realise that the crowns where mainly 1 1/8 but Im sure I can get a shim to fit.

Cheers Pete
 
I have a RS Judy Steel steerer that is about 6 3/4" long, I need one that is about 8". It has the two allen pinch bolts on either side of the crown and is in perfect shape just not long enough. Anyone got anything?
 
Still looking for a Threadless 1 1/8'' Rock Shox Mag 21 steerer & crown 190/200mm long, swop or w/h/u for 1 1/8'' Mag 21 threaded 190mm or Pace threaded 1'' steerer & crown 165mm long but missing circlip.
 
i´m looking for a manitou m3/m4 steerer in 1 1/8 A-head threadless 200mm.

i have 2x 1 1/4 witch 163mm & 170mm threaded.
 
I have a mag 21 1-1/8" threaded steerer 168mm, there are a few marks on the back of the crown. I would like a steer that is about 210-220mm... The bike has about a 180mm steer tube (estimate from photo, dangerous I know). I don't know what a typical 1992 XT headset stack would have been...35mm or so?
 
I'd also trade my 1994 SL ti... with above steerer for regular mag 21 sl's with a longer steerer. They are no good to me if I can't get a longer steerer!
 

Latest posts

Back
Top