Dave Russell Complete bike Price drop 270 Pounds posted

Woodyuk

Gold Trader
Feedback
View
Hi

I have for sale a Dave Russell Handbuilt UK racing bike

Here are the dimensions I have taken of the frame, not really sure how this is done properly most of my bikes are mountain bikes which have size stamped on frame :roll: so here are the measurements I took.

Headtube from where headset starts on frame at bottom to where headset starts on top =15.5 cm

Top tube ( Top side measured)= 53 cm

Seat Tube Middle of cranks to seat tube top = 55cm

Seat tube inside measurement = 52.5 - 53 cm
Not sure of age but I would say I Have had the bike for 25 years and bike was probably at least maybe 20 years old when I bought it

Frame has :
Campagnolo dropouts
OMAS Hubs
Mavic Rims
OMAS Headset
3TT stem
Stronglight cranks
Suntour deraileur
Unfortunatly the bike is too big for me I have holding on to it for now 25years but I have decided to let it go and hope it goes to someone who is the right size and appriciates the brilliant frame handbuilt by Dave Russell

Price 350 Pounds posted with Tracking
NOW 300 Pounds posted with Tracking
 

Attachments

  • DSC01620.JPG
    DSC01620.JPG
    184 KB · Views: 2,767
  • DSC01621.JPG
    DSC01621.JPG
    145.9 KB · Views: 2,767
  • DSC01622.JPG
    DSC01622.JPG
    152.3 KB · Views: 2,767
  • DSC01623.JPG
    DSC01623.JPG
    60.7 KB · Views: 2,767
  • DSC01625.JPG
    DSC01625.JPG
    137.5 KB · Views: 2,767
  • DSC01626.JPG
    DSC01626.JPG
    52.6 KB · Views: 2,767
  • DSC01633.JPG
    DSC01633.JPG
    189.6 KB · Views: 2,767
Re: Dave Russell Handbuilt UK racing bike

Nice......... drilled dropouts, over the BB cable guides with rear brake cable on the top tube, Portecatena rear dropouts... Late 70's to early 80's classic.

Shaun
 
Re: Dave Russell Handbuilt UK racing bike

Yep the frame is really beatifull and the Bottom bracket is also drilled ....
would really like this bike to return to the UK to someone who will show this bike some TLC


Also included

Original 3TT Stem
Maillard Cog
Original headset
and spare NOS tire



The Only parts on the bike that are not original are the brake levers and the mavic Rims
Frame is very light and and light components and seriously light seat :cool:
 

Attachments

  • DSC01634.JPG
    DSC01634.JPG
    73.1 KB · Views: 2,619
  • DSC01635.JPG
    DSC01635.JPG
    82.5 KB · Views: 2,619
  • DSC01636.JPG
    DSC01636.JPG
    61.4 KB · Views: 2,619
Re: Dave Russell Handbuilt UK racing bike

.....nice vintage machine but is there any reason why you have the seatpost back to front?
 
Re: Dave Russell Handbuilt UK racing bike

Well spotted
Ahh yes ...was waiting for someone to spot that :D
I have been trying to find the right size allen key to fit so I could swap it around but it does not use the modern day allen key size :roll:
I know I have the allen key somewhere
 
Re: Dave Russell Handbuilt UK racing bike

Woodyuk":3b6yvcme said:
Well spotted
Ahh yes ...was waiting for someone to spot that :D
I have been trying to find the right size allen key to fit so I could swap it around but it does not use the modern day allen key size :roll:
I know I have the allen key somewhere
chances are it's an Imperial allen key or a 5.5mm equivalent, B & Q should have 'em, good luck!
 
Re: Dave Russell Handbuilt UK racing bike

Here are the dimensions I have taken of the frame, not really sure how this is done properly most of my bikes are mountain bikes which have size stamped on frame :roll: so here are the measurements I took.

Headtube from where headset starts on frame at bottom to where headset starts on top =15.5 cm

Top tube ( Top side measured)= 53 cm

Seat Tube Middle of cranks to seat tube top = 55cm

Seat tube inside measurement = 52.5 - 53 cm
 
Back
Top