1995 Kona Kilauea: Bottom Bracket
- Thread starter Ren
- Start date
- Feedback
- View
Ned to know the cranks for the bb length.
Better for the price , probably not.
Lighter yes, look for Ti or old un90/91's and raceface...etc...
Off the shelf though you'll pay.
There are Tange ones, no idea where to buy them and(the high quality ones) also IRD can be had over here now.
Better for the price , probably not.
Lighter yes, look for Ti or old un90/91's and raceface...etc...
Off the shelf though you'll pay.
There are Tange ones, no idea where to buy them and(the high quality ones) also IRD can be had over here now.
Hi,
I recently bought a Tange to replace a UN-91 in my 94 AA.
Quality wise i think i made a very good buy, because the bearings in the Tange are sealed and replaceable.
I went for a 68X113 (triple chainrings).
Look here: http://www.ebay.co.uk/itm/Tange-Sealed- ... 1e7530aebf
Regards
I recently bought a Tange to replace a UN-91 in my 94 AA.
Quality wise i think i made a very good buy, because the bearings in the Tange are sealed and replaceable.
I went for a 68X113 (triple chainrings).
Look here: http://www.ebay.co.uk/itm/Tange-Sealed- ... 1e7530aebf
Regards
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ren
Dirt Disciple
- Feedback
- View
For info on the range (IRD and other have are Tange manufactured)
www.tangeseiki.com/tangeseiki_news/bott ... 145430.png
www.tangeseiki.com/tangeseiki_news/bott ... 145430.png
- Feedback
- View
Disappointing that they make the IRD ones, as I had one of those and had to return it as it almost instantly lost smoothness. Probably just a dodgy one, but still off-putting.
