rst usa xmo ti forks

super swin · Sep 17, 2006

any info/ instuctions would be appreciated, i belive they have the englund cartridges fitted, do they have a negive air spring if so which leg?
Also the recommended pressure i belive is 85 psi, but at that pressure they bottom out ( i am 12.5 stone) just by sitting on the bike!
they are nos and are red with white and black decals.
help please.
ta
jon

Agency_Scum · Sep 17, 2006

Air cartridges in both legs ( one for spring, one rebound ). Be ultra-careful putting them back in ( getting them out is easy ) as there is a way of ballsing it up that locks them in the legs forever. Simply take out and place in order the parts you remove to do it EXACTLY in reverse and the right way up when you put them back in.
As for weight, you're way inside the weight limit for them so no worries there.
You may have bottomed out because you've only pressurised one of the cartridges.

super swin · Sep 17, 2006

to get them set up for 1/3 sag i need 110 psi( that is in both legs), 25 more than the recommended, am i in danger of causing damage to them?
Also i have trawed the net for a manual, but have drawn a blank :cry:
anybody got one?
ta
jon

Agency_Scum · Sep 18, 2006

I don't think so but to be sure ask Timmy.

super swin · Sep 19, 2006

phoned tim, he wont touch rst forks, so back to the drawing board i am afraid :cry:
thanks so for
jon

rst usa xmo ti forks

super swin

Retro Guru

Agency_Scum

super swin

Retro Guru

Agency_Scum

super swin

Retro Guru

Similar threads

Latest posts